3 Select the month | – MANUAL CLOCK SET – | |||
Press the PLAY/K or STOP/L but- | MONTH | DAY | YEAR | |
ton until your desired month | 0 5 / | – – – – – – – – – | ||
|
|
|
| |
appears. (Example: May → 05) | HOUR | MINUTE | ||
Then, press the F.FWD/B button. | – – | : | – – | – – |
|
|
|
| |
|
| |||
4 Select the day | – MANUAL CLOCK SET – | |||
Press the PLAY/K or STOP/L but- | MONTH | DAY | YEAR | |
ton until your desired day appears. | 0 5 / | 0 6 – – – – – – – | ||
|
|
|
| |
(Example: 6th → 06) | HOUR | MINUTE | ||
Then, press the F.FWD/B button. | – – | : | – – | – – |
|
|
|
| |
|
| |||
5 Select the year | – MANUAL CLOCK SET – | |||
Press the PLAY/K or STOP/L but- | MONTH DAY | YEAR | ||
ton until your desired year appears. | 0 5 | / 0 6 TUE 2 0 0 3 | ||
|
|
|
| |
(Example: 2003) | HOUR | MINUTE | ||
|
|
|
| |
Then, press the F.FWD/B button. | – – | : – – – – | ||
|
|
|
| |
PLEASE NOTE:
If there is no local PBS station in your area or on your cable system, select “AUTO CLOCK” and press the F.FWD/B or REW/s button to turn [OFF] this function. Then you can manually adjust the clock.
AUTOMATIC CLOCK SETTING
Make sure ...
•The TV/VCR is turned on.
•Confirm the TV/VCR is receiving a RF (Radio Frequency) signal from either an antenna or cable system connection using the ANT IN jack on the rear of the TV/VCR.
NOTE:
•If a cable converter box is being used, make sure it is powered on.
•You must use the TV/VCR remote control to per- form the clock setting procedure.
6 Select the hour | – MANUAL CLOCK SET – | ||
|
|
| |
Press the PLAY/K or STOP/L but- MONTH DAY | YEAR | ||
ton until your desired hour appears. | 0 5 | / 0 6 | TUE 2 0 0 3 |
|
|
| |
(Example: 5, PM) | HOUR | MINUTE | |
|
|
| |
Then, press the F.FWD/B button. | 0 5 | : – – | PM |
|
|
| |
|
| ||
7 Select the minute | – MANUAL CLOCK SET – | ||
|
|
| |
Press the PLAY/K or STOP/L but- | MONTH DAY | YEAR | |
|
|
| |
1Select “SETTING CLOCK”
Press the MENU button on the remote control.
Press the PLAY/K or STOP/L but- ton to select “SETTING CLOCK”. Press the F.FWD/B button to enter “SETTING CLOCK” menu.
– M E N U –
TIMER PROGRAMMING PICTURE CONTROL
BSETTING CLOCK CHANNEL SET UP USER’S SET UP LANGUAGE [ENGLISH] ZERO RETURN
TIME SEARCH
ton until the desired minute | 0 5 | / 0 6 | TUE 2 0 0 3 | |
|
|
| ||
appears. (Example: 40) | HOUR | MINUTE | ||
0 5 | : 4 0 | PM | ||
| ||||
|
|
|
| |
8 Start the clock |
|
| 5:40 PM | |
Press the MENU button on the |
|
|
| |
remote control. |
|
|
| |
2 Set “AUTO CLOCK” to [ON] | – SETTING CLOCK – | |
Press the F.FWD/B button until | B AUTO CLOCK | [ON] |
AUTO CLOCK [ON] appears. | AUTO CLOCK CH SEARCH | |
MANUAL CLOCK SET | [ 02 ] | |
| AUTO CLOCK CH | |
| D.S.T. | [OFF] |
3Begin “AUTO CLOCK CH SEARCH”
Although seconds are not dis- played, they begin counting from
00 when you press the MENU but-
ton on the remote control. Use this feature to syn- chronize the clock with the correct time.
NOTE:
When unplugging the AC cord or if there is a power failure for more than 3 seconds, you may have to reset the clock.
TO CHANGE CLOCK SETTING
If you want to change the clock, 1)Follow steps [1] and [2].
2)Select where you want to change using the F.FWD/B or REW/s button.
3)Enter correct numbers using the PLAY/K or STOP/L button.
4)Press the MENU button on the remote control to start the clock.
Press the STOP/L button to select
“AUTO CLOCK CH SEARCH”. Press the F.FWD/B button.
•The TV/VCR is now searching for the station which contain the auto clock set signal. The search for a signal may take up to 20 seconds per channel.
•“_ _” appears at the lower left of the screen when the search has ended.
•Auto Clock station- write down the number(s) that appear on the screen. These are the auto clock station(s) in your area. See item 4 below.
– SETTING CLOCK –
AUTO CLOCK | [ON] |
BAUTO CLOCK CH SEARCH
AUTO CLOCK CH | [ 02 ] |
MANUAL CLOCK SET |
|
D.S.T. | [OFF] |
– AUTO CLOCK CH SEARCH –
08 10 13
_ _
- 12 - | EN |