Sylvania SRC2213W, SRC2419 owner manual SET UP for USE, Front A/V Input, Installing the Batteries

TO RECORD A SCRAMBLED/UNSCRAMBLED CHANNEL

1)Set the TV/VCR channel selector to the output channel of the Cable Converter Box or Satellite Box. (Example: CH3)

2)Select the channel to record from your Cable Converter Box or Satellite Box.

FRONT A/V INPUT

When using an external input signal (another VCR, video game or video camera), connect the player’s audio/video output cables to the AUDIO IN/ VIDEO IN jacks of your TV/VCR. Then press the CHAN- NEL K or L button until “AUX” appears on the screen.

NOTE: “AUX” is found below the	AUX
lowest memorized channel.
(Example: CH2)

INSTALLING THE BATTERIES

1)Open the battery compartment cover by pressing the cover on the remote unit in the direction of the arrow.

2)Insert 2 “AA” penlight batteries into the battery

compartment in the direction indicated by the polarity (+/-) markings.

3)Replace the cover.

SET UP FOR USE

SELECTING THE LANGUAGE

1Plug in the TV/VCR power cord

Plug the TV/VCR power cord into a standard AC outlet.

NOTE:

• If some digits appear in the corner of the screen, press the POWER button without unplugging the power cord.

Make sure ...

•Press the POWER button to turn on the TV/VCR. NOTE: This function effects only the language on the screen menu and not the audio source.

2 Select “LANGUAGE”	TIMER PROGRAMMING
	– M E N U –
Press the MENU button on the	PICTURE CONTROL
	SETTING CLOCK
remote control.	CHANNEL SET UP
	V-CHIP SET UP
	USER’S SET UP
Press the PLAY/K or STOP/L but-	B LANGUAGE [ENGLISH]
	ZERO RETURN
	CAPTION [OFF]
ton to point to “LANGUAGE”.	TIME SERARCH
	INDEX SEARCH

3Select “ENGLISH”, “ESPAÑOL” or

“FRANÇAIS”

Select “ENGLISH”, “ESPAÑOL”= Spanish or “FRANÇAIS”= French using the F.FWD/ B or REW/s button.

4Exit the Language mode

Press the MENU button on the remote control to return to TV mode.

NOTE: If for some reason the menu is in Spanish or French, press the MENU button on the remote con- trol, press the PLAY/K button to point to “IDIOMA [ESPAÑOL]” or “LANGAGE [FRANÇAIS]”, then press the F.FWD/B button, then press the MENU button on the remote control.

CLOCK SET UP

(AUTO / MANUAL)

The TV/VCR clock must be set correctly before timer recording is possible. It is suggested that the clock be set manually when first setting up the TV/VCR. Then, set to [ON] the auto clock setting which will periodi- cally correct the setting if necessary.

NOTE: If you cannot receive a station with time signals, auto clock setting cannot be performed. Use manual setting only.

MANUAL CLOCK SETTING

Make sure ...

•The TV/VCR is turned on.

- 10 - EN

9I03