Sylvania SRC2213W, SRC2419 To Change Clock Setting, Automatic Clock Setting, Please Note

In the example below, the clock is to be set to:

DATE	May 6th, 2004
SETTING TIME	5:40PM

8Start the clock

Press the MENU button on the remote control.

5:40 PM

1Select “SETTING CLOCK”

Press the MENU button on the remote control.

Press the PLAY/K or STOP/L button to point to “SETTING CLOCK”.

– M E N U –

TIMER PROGRAMMING PICTURE CONTROL

BSETTING CLOCK CHANNEL SET UP USER’S SET UP V-CHIP SET UP LANGUAGE [ENGLISH] CAPTION [OFF] ZERO RETURN

TIME SEARCH INDEX SEARCH

Although seconds are not dis- played, they begin counting from

00 when you press the MENU but- ton on the remote control. Use this

feature to synchronize the clock with the correct time.

NOTE:

Then, press the F.FWD/B button.

2Select “MANUAL CLOCK SET”

Press the PLAY/K or STOP/L	– SETTING CLOCK –
button to point to “MANUAL	AUTO CLOCK				[ON]
CLOCK SET”.	AUTO CLOCK CH SEARCH
	AUTO CLOCK CH				[ 02 ]
	B MANUAL CLOCK SET
Then, press the F.FWD/B button.	D.S.T.				[OFF]
3 Select the month	– MANUAL CLOCK SET –
Press the PLAY/K or STOP/L	MONTH DAY			YEAR
button until your desired month	0 5 / – – – – – – – – –
appears. (Example: May → 05)	HOUR		MINUTE
Then, press the F.FWD/B button.	– –	: – –		– –
4 Select the day	– MANUAL CLOCK SET –
Press the PLAY/K or STOP/L but-	MONTH DAY				YEAR
ton until your desired day appears.	0 5	/	0 6	– – –	– – – –
(Example: 6th → 06)	HOUR		MINUTE
Then, press the F.FWD/B button.	– –	: – –		– –
5 Select the year	– MANUAL CLOCK SET –
Press the PLAY/K or STOP/L but-	MONTH DAY				YEAR
ton until your desired year appears.	0 5	/ 0 6		THU	2 0 0 4
(Example: 2004)	HOUR		MINUTE
Then, press the F.FWD/B button.	– –	: – –		– –
6 Select the hour	– MANUAL CLOCK SET –
Press the PLAY/K or STOP/L but-	MONTH DAY				YEAR
ton until your desired hour appears.	0 5	/ 0 6		THU	2 0 0 4
(Example: 5, PM)	HOUR		MINUTE
Then, press the F.FWD/B button.	0 5	: – –		PM
7 Select the minute	– MANUAL CLOCK SET –
Press the PLAY/K or STOP/L but-	MONTH DAY				YEAR
ton until the desired minute	0 5	/ 0 6		THU	2 0 0 4
appears. (Example: 40)	HOUR		MINUTE
	0 5	: 4 0		PM

When unplugging the AC cord or if there is a power failure for more than 3 seconds, you may have to reset the clock.

TO CHANGE CLOCK SETTING

If you want to change the clock, 1)Follow steps [1] and [2].

2)Select where you want to change using the F.FWD/B or REW/s button.

3)Enter correct numbers using the PLAY/K or STOP/L button.

4)Press the MENU button on the remote control to start the clock.

PLEASE NOTE:

If there is no local PBS station in your area or on your cable system, select “AUTO CLOCK” and press the F.FWD/B or REW/s button to turn [OFF] this function. Then you can manually adjust the clock.

AUTOMATIC CLOCK SETTING

Make sure ...

•The TV/VCR is turned on.

•Confirm the TV/VCR is receiving a RF (Radio Frequency) signal from either an antenna or cable system connection using the ANT. terminal on the rear of the TV/VCR.

NOTE:

•If a cable converter box is being used, make sure it is powered on.

•You must use the TV/VCR remote control to per- form the clock setting procedure.

•If the TV/VCR is connected directly to a cable converter box or satellite box, the local PBS sta- tion must be selected on the cable box itself, and the TV/VCR must be set to the output channel of the cable converter box or satellite box (usually channel 3 or 4), to be able to set up or correct the clock automatically.

- 11 - EN

9I03