Sylvania SRC2213W, SRC2419 owner manual Slow Motion, Rental Playback, Time Search, Index Search

TIME SEARCH

The Time Search function makes it possible to quick- ly advance the tape to your desired position simply by entering the exact amount of playback time you want to skip.

•After index search, the TV/VCR will play the tape automatically.

•In some cases, the index mark at the beginning of video tape cannot be detected.

NOTES:

•Time Search can be set up to a maximum of 9 hours 50 minutes (9:50) by 10 minutes at a time.

•This function will not operate in recording mode. In the example below: To watch a program that is 2 hours, 50 minutes from the present tape position, in either direction.

1Insert a tape.

2 Select “TIME SEARCH” mode	TIME SEARCH
	2 : 50

Press the TIME SEARCH button (with each push it will increase by 10 minutes).

SLOW MOTION

Press the SLOW button to reduce the playback speed. The TV/VCR mutes the sound during slow motion. Press the PLAY button to return to normal playback. NOTE: If left in the Slow mode for more than five minutes, the TV/VCR will automatically go into the Stop mode.

RENTAL PLAYBACK

This function enables you to improve the picture quality when playing back worn cassettes such as rented tapes.

3Enter your desired time

Press the PLAY/K or STOP/L button until your desired time appears. (Example: “2:50” stands for 2 hours 50 minutes)

If you wish to cancel the Time Search at this point, press the MENU button on the remote control.

1Select “USER’S SET UP”

Press the MENU button on the remote control.

Press the PLAY/K or STOP/L but- ton to point to “USER’S SET UP”. Then, press the F.FWD/B button.

– M E N U –

TIMER PROGRAMMING PICTURE CONTROL SETTING CLOCK CHANNEL SET UP

BUSER’S SET UP V-CHIP SET UP LANGUAGE [ENGLISH] CAPTION [OFF] ZERO RETURN

TIME SEARCH INDEX SEARCH

4Begin Time Search

By pressing the REW/s or F.FWD/B button, the TV/VCR will rewind or fast forward to the specified point.

The time counts down as the searching progresses. When 0:00 is reached, the tape will start playback automatically.

TO CANCEL THE TIME SEARCH at this point

2 Set “RENTAL” to [ON]	– USER’S SET UP –
Press the PLAY/K or STOP/L but-	B RENTAL	[ON]
ton to point to “RENTAL”.	REPEAT PLAY	[OFF]
	AUTO RETURN	[OFF]

Press the F.FWD/B or REW/s button until [ON] appears.

3Exit the Rental setting

Press the MENU button on the remote control to return to the TV mode.

Press the STOP/EJECT button on the TV/VCR or the remote control. This will delete the selected time.

INDEX SEARCH

An index signal is recorded on the tape automatically when the recording is started. To view a recording at a specific start point:

– M E N U –

4Start playback

Press the PLAY button to start playback. “RENTAL PLAY B” appears.

•Once you select the Rental mode, it stays in effect even after you turn off the TV/VCR.

TO CANCEL THE RENTAL MODE

1)Press the MENU button on the	PICTURE CONTROL
	TIMER PROGRAMMING	Repeat steps [1] and [2], select [OFF] using the
remote control. Press the PLAY/K	SETTING CLOCK
	CHANNEL SET UP	F.FWD/B or REW/s button on the remote control.
	V-CHIP SET UP
or STOP/L button to point to	USER’S SET UP
	LANGUAGE [ENGLISH]	Press the MENU button on the remote control to
“INDEX SEARCH”, then press	CAPTION [OFF]
	ZERO RETURN	return to TV mode.
	B INDEX SEARCH
the F.FWD/B button.	TIME SEARCH
		If there is a power failure of any kind, the unit
2)Press the PLAY/K or STOP/L button within 30 sec-
		will remember the setting.
onds until the number of programs that you want to
skip appears.
3)Press the F.FWD/B or REW/s button to start
index search. If you want to go forward, press the
F.FWD/B button. If you want to go back, press the
REW/s button.	- 19 -		EN

9I03