Sylvania SRC2213W, SRC2419 Playback, FM Mode 13 Model only, Change Access Code, Precautions

ACCESS CODE

_ _ _ _

– V-CHIP SET UP –

TV RATING MPAA RATING

B CHANGE CODE

NEW CODE

X X X X

CONFIRM CODE

_ _ _ _

5Exit the V-Chip setting mode

Press the MENU button on the remote control to enter the setting and exit the screen.

CHANGE ACCESS CODE

To change access code, follow the steps.

1Select “V-CHIP SET UP”

Press the MENU button on the remote control. Press the PLAY/K or STOP/L button to select “V-

CHIP SET UP”.

Then, press the F.FWD/B button.

2 Enter Access code

Use the number on the remote con- trol to enter the access code.

Note: The default code is 0000.

3 Select “CHANGE CODE”

Press the PLAY/K or STOP/L but- ton to select "CHANGE CODE". Then, press the F.FWD/B button.

4Enter New code

Use the number buttons to enter your desired access code in the NEW CODE space. Then enter the same code in the CONFIRM CODE space. V-CHIP SET UP screen appear on the screen.

•If you enter wrong code, repeat step 4, making sure you enter the same new code exactly in the confirm code space.

5Exit the V-Chip setting mode

Press the MENU button on the remote control to exit the screen.

Note: If you unplug the power code or power failure occurs, the changed access code will be lost and will return to default (0000). Change your access code again as necessary.

FM MODE (13” MODEL ONLY)

This function enables you to receive FM radio broad- casting.

1Set the FM mode

Press the TV/FM button on the

remote control. The radio frequency FM 88.0 MHz appears on the TV screen.

2Select the radio frequency you want to receive

Press the CHANNEL K or L button until your desired radio frequency appears.

NOTES:

•The radio frequency indication repeats to appear and disappear.

•You can not record the FM radio station.

•If you receive a weak radio signal, you may change the FM Antenna mode to INT(internal) or EXT(external) by following the step below.

1)Press the MENU button. Press the PLAY/K or STOP/L button to point to “CHANNEL SET UP”. Then, press the F.FWD/B button.

2)Press the PLAY/K or STOP/L button to point to “FM ANTENNA”. Select [INT] or [EXT] using the F.FWD/B or REW/s button.

PLAYBACK

This TV/VCR will operate with any cassette that has the mark. For best results, we recommend the use of high-quality tapes. Do not use poor quality or damaged tapes.

INSERTING A CASSETTE

Insert the cassette in the direction as shown. Push in gently, but continuously, on the center-back of the cassette until it is drawn into the TV/VCR. The TV/VCR will automatically turn on.

Window

CORRECTWRONG

PRECAUTIONS

•Avoid moisture. Moisture condensation may occur on the tape if it is moved from a cold place to a warm place or visa versa. Before using a tape with these conditions, to avoid damage of the tape and your TV/VCR, wait until the tape has warmed to room temperature and the moisture has evaporated.

•Avoid extreme heat, high humidity and magnetic fields from speaker systems.

•Do not tamper with the cassette mechanism.

•Do not touch the tape with your fingers.

- 17 - EN

9I03