Emerson EWC0903 owner manual Automatic Clock Setting, To Change Clock Setting, Please Note

3 Select the month	– MANUAL CLOCK SET –
Press the PLAY/K or STOP/L but-	MONTH DAY			YEAR
ton until your desired month	0 5	/ – –		– – – – – – –
appears. (Example: May → 05)	HOUR		MINUTE
Then, press the F.FWD/B button.	– –	: – –		– –
4 Select the day	– MANUAL CLOCK SET –
Press the PLAY/K or STOP/L but-	MONTH DAY			YEAR
ton until your desired day appears.	0 5	/	0 6 – – – – – – –
(Example: 6th → 06)	HOUR		MINUTE
Then, press the F.FWD/B button.	– –	: – –		– –

PLEASE NOTE:

If there is no local PBS station in your area or on your cable system, select “AUTO CLOCK” and press the F.FWD/B or REW/s button to turn [OFF] this function. Then you can manually adjust the clock.

AUTOMATIC CLOCK SETTING

Make sure ...

•The TV/VCR is turned on.

•Confirm the TV/VCR is receiving a RF (Radio Frequency) signal from either an antenna or cable system connection using the ANT IN jack on the rear of the TV/VCR.

5 Select the year	– MANUAL CLOCK SET –
Press the PLAY/K or STOP/L but-	MONTH DAY			YEAR
ton until your desired year appears.	0 5	/ 0 6	TUE	2 0 0 3
(Example: 2003)	HOUR	MINUTE
Then, press the F.FWD/B button.	– –	: – –	– –
6 Select the hour	– MANUAL CLOCK SET –
Press the PLAY/K or STOP/L but-	MONTH DAY			YEAR
ton until your desired hour appears.	0 5	/ 0 6	TUE	2 0 0 3
(Example: 5, PM)	HOUR	MINUTE
Then, press the F.FWD/B button.	0 5	: – –	PM
7 Select the minute	– MANUAL CLOCK SET –

NOTE:

•If a cable converter box is being used, make sure it is powered on.

•You must use the TV/VCR remote control to per- form the clock setting procedure.

•If the TV/VCR is connected directly to a cable converter box or satellite box, the local PBS station must be selected on the cable box itself, and the TV/VCR must be set to the output channel of the cable converter box or satellite box (usually chan- nel 3 or 4), to be able to set up or correct the clock automatically.

Press the PLAY/K or STOP/L but-	MONTH DAY		YEAR
ton until the desired minute	0 5	/ 0 6	TUE 2 0 0 3
appears. (Example: 40)	HOUR	MINUTE
	0 5	: 4 0	PM
8 Start the clock			5:40 PM
Press the MENU button on the
remote control.

1Select “SETTING CLOCK”

Press the MENU button on the remote control.

Press the PLAY/K or STOP/L but- ton to select “SETTING CLOCK”. Press the F.FWD/B button to enter “SETTING CLOCK” menu.

– M E N U –

TIMER PROGRAMMING PICTURE CONTROL

BSETTING CLOCK CHANNEL SET UP USER’S SET UP LANGUAGE [ENGLISH] ZERO RETURN

TIME SEARCH

Although seconds are not dis- played, they begin counting from

00 when you press the MENU button on the remote control. Use this feature to synchronize the clock with the correct time.

NOTE:

When unplugging the AC cord or if there is a power

2 Set “AUTO CLOCK” to [ON]	– SETTING CLOCK –
Press the F.FWD/B button until	B AUTO CLOCK	[ON]
AUTO CLOCK [ON] appears.	AUTO CLOCK CH SEARCH
	MANUAL CLOCK SET	[ 02 ]
	AUTO CLOCK CH
	D.S.T.	[OFF]

3Begin “AUTO CLOCK CH SEARCH”

failure for more than 3 seconds, you may have to reset the clock.

TO CHANGE CLOCK SETTING

If you want to change the clock, 1)Follow steps [1] and [2].

2)Select where you want to change using the F.FWD/B or REW/s button.

3)Enter correct numbers using the PLAY/K or STOP/L button.

4)Press the MENU button on the remote control to start the clock.

Press the STOP/L button to select

“AUTO CLOCK CH SEARCH”. Press the F.FWD/B button.

•The TV/VCR is now searching for the station which contain the auto clock set signal. The search for a signal may take up to 20 seconds per channel.

•“_ _” appears at the lower left of the screen when the search has ended.

•Auto Clock station- write down

– SETTING CLOCK –

AUTO CLOCK [ON]

BAUTO CLOCK CH SEARCH

AUTO CLOCK CH	[ 02 ]
MANUAL CLOCK SET
D.S.T.	[OFF]

– AUTO CLOCK CH SEARCH –

08 10 13

_ _

- 12 - EN

9J27