TO SELECT A DESIRED CHANNEL
You can select the desired channel by using the CHANNEL K or L button or directly pressing the number buttons on the remote control.
Note for using the number buttons:
•When selecting cable channels which are higher than 99, press the +100 button first, then, press the last two digits. (Example: to select channel 125, first press the +100 button then press “2” and “5”).
•You must proceed
CLOCK SET UP
(AUTO / MANUAL)
The TV/VCR clock must be set correctly before VCR timer recording is possible. It is suggested that the clock be set manually when first setting up the TV/VCR. Then, set to [on] the auto clock setting which will periodically correct the setting if neces- sary.
NOTE: If you cannot receive a station with time signals, auto clock setting cannot be performed. Use manual setting only.
MANUAL CLOCK SETTING
Make sure ...
•The TV/VCR is turned on.
In the example below, the clock is to be set to:
DATE | May 6th, 2003 |
SETTING TIME | 5:40PM |
4 Select the day | – MANUAL CLOCK SET – | ||||
Press the PLAY/K or STOP/L but- | MONTH DAY |
| YEAR | ||
ton until your desired day appears. | 0 5 | / | 0 6 | – – – – – – – | |
(Example: 6th → 06) | HOUR |
| MINUTE |
| |
Then, press the F.FWD/B button. | – – | : – – | – – |
| |
|
| ||||
|
|
| |||
5 Select the year | – MANUAL CLOCK SET – | ||||
Press the PLAY/K or STOP/L but- | MONTH DAY |
| YEAR | ||
ton until your desired year appears. | 0 5 | / 0 6 | TUE | 2 0 0 3 | |
(Example: 2003) | HOUR |
| MINUTE |
| |
Then, press the F.FWD/B button. | – – | : – – | – – |
| |
|
|
|
|
| |
|
|
| |||
6 Select the hour | – MANUAL CLOCK SET – | ||||
Press the PLAY/K or STOP/L but- | MONTH DAY |
| YEAR | ||
ton until your desired hour appears. | 0 5 | / 0 6 | TUE | 2 0 0 3 | |
(Example: 5, PM) | HOUR |
| MINUTE |
| |
Then, press the F.FWD/B button. | 0 5 | : – – | PM |
| |
|
|
|
|
| |
|
|
|
|
|
|
7 Select the minute | – MANUAL CLOCK SET – | ||||
Press the PLAY/K or STOP/L but- | MONTH DAY |
| YEAR | ||
ton until the desired minute | 0 5 | / 0 6 | TUE | 2 0 0 3 | |
| |||||
appears. (Example: 40) | HOUR |
| MINUTE |
| |
| 0 5 | : 4 0 | PM |
| |
|
|
|
|
|
|
8 Start the clock |
|
|
|
| 5:40 PM |
Press the MENU button on the |
|
|
|
|
|
remote control. |
|
|
|
|
|
Although seconds are not displayed, they begin counting from 00 when
you press the MENU button on the remote control. Use this feature to synchronize the clock with the
1Select “SETTING CLOCK”
Press the MENU button on the remote control.
Press the PLAY/K or STOP/L button to point to “SETTING CLOCK”.
Then, press the F.FWD/B button.
– M E N U –
TIMER PROGRAMMING PICTURE CONTROL
BSETTING CLOCK CHANNEL SET UP USER’S SET UP
TIME SEARCH INDEX SEARCH
correct time.
NOTE:
When unplugging the AC cord or if there is a power failure for more than 3 seconds, you may have to reset the clock.
TO CHANGE CLOCK SETTING
If you want to change the clock,
2Select “MANUAL CLOCK SET”
Press the PLAY/K or STOP/L | – SETTING CLOCK – | ||
button to point to “MANUAL | AUTO CLOCK | [ON] | |
CLOCK SET”. | AUTO CLOCK CH SEARCH | ||
B MANUAL CLOCK SET | |||
| AUTO CLOCK CH | [ 02 ] | |
Then, press the F.FWD/B button. | D.S.T. |
| [OFF] |
|
|
| |
|
|
|
|
3 Select the month |
|
|
|
Press the PLAY/K or STOP/L | – MANUAL CLOCK SET – | ||
button until your desired month | MONTH DAY | YEAR | |
appears. (Example: May → 05) | 0 5 / – – – – – – – – – | ||
|
|
| |
Then, press the F.FWD/B button. | HOUR | MINUTE |
|
| – – | : – – – – |
|
1)Follow steps [1] and [2].
2)Select where you want to change using the F.FWD/B or REW/s button.
3)Enter correct numbers using the PLAY/K or STOP/L button.
4)Press the MENU button on the remote control to start the clock.
PLEASE NOTE:
If there is no local PBS station in your area or on your cable system, select “AUTO CLOCK” and press the F.FWD/B or REW/s button to turn [OFF] this function. Then you can manually adjust the clock.
- 11 - | EN |