Sylvania SRC2213X Channel SET UP Again, Deleting or Adding, Automatic Clock Setting, CH Search

AUTOMATIC CLOCK SETTING

Make sure ...

• The TV/VCR is turned on.

• Confirm the TV/VCR is receiving a RF (Radio

4Enter the channel number that contains the Automatic Clock Setting Signal

Frequency) signal from either an antenna or cable

system connection using the ANT IN jack on the

rear of the TV/VCR.

NOTE:

• If a cable converter box is being used, make sure it

is powered on.

• You must use the TV/VCR remote control to per-

form the clock setting procedure.

• If the TV/VCR is connected directly to a cable

converter box or satellite box, the local PBS station

must be selected on the cable box itself, and the

TV/VCR must be set to the output channel of the

cable converter box or satellite box (usually chan-

Press the MENU button on the remote control.

Press the PLAY/K or STOP/L button to select “SETTING CLOCK”.

Press the F.FWD/B button to enter “SETTING CLOCK” menu.

Press the STOP/L button to select “AUTO CLOCK CH”.

Press the F.FWD/B or REW/s buttons until you locate Auto Clock Set station number. See item 3 above.

– M E N U –

TIMER PROGRAMMING PICTURE CONTROL

BSETTING CLOCK CHANNEL SET UP USER’S SET UP V-CHIP SET UP LANGUAGE [ENGLISH] CAPTION [OFF] ZERO RETURN

TIME SEARCH INDEX SEARCH

– SETTING CLOCK –

AUTO CLOCK	[ON]
AUTO CLOCK CH SEARCH
B AUTO CLOCK CH	[ 45]
MANUAL CLOCK SET
D.S.T.	[OFF]

nel 3 or 4), to be able to set up or correct the clock

automatically

Press the MENU button to exit the screen.

5 Turn off the TV/VCR

1Select “SETTING CLOCK”

Press the MENU button on the remote control.

Press the PLAY/K or STOP/L but-	– M E N U –
	TIMER PROGRAMMING
ton to select “SETTING CLOCK”.	PICTURE CONTROL
	B SETTING CLOCK
Press the F.FWD/B button to enter	CHANNEL SET UP
	USER’S SET UP
	V-CHIP SET UP
“SETTING CLOCK” menu.	LANGUAGE [ENGLISH]
	ZERO RETURN
	CAPTION [OFF]
	TIME SEARCH
	INDEX SEARCH

Once the TV/VCR is turned off , it will periodically check and set the correct date and time.

CHANNEL SET UP AGAIN

						Make sure ...
2 Set “AUTO CLOCK” to [ON]		– SETTING CLOCK –				• Press the POWER button to turn on the TV/VCR.
Press the F.FWD/B button until	B AUTO CLOCK			[ON]
AUTO CLOCK [ON] appears.	AUTO CLOCK CH SEARCH					1 Select “CHANNEL SET UP”
	AUTO CLOCK CH			[ 02 ]
	MANUAL CLOCK SET
	D.S.T.			[OFF]		Press the MENU button on the	– M E N U –
							TIMER PROGRAMMING
						remote control.	PICTURE CONTROL
							SETTING CLOCK
							B CHANNEL SET UP
						Press the PLAY/K or STOP/L but-	USER’S SET UP
							V-CHIP SET UP
							LANGUAGE [ENGLISH]
3 Begin “AUTO CLOCK CH SEARCH”						ton to point to “CHANNEL SET	CAPTION [OFF]
							ZERO RETURN
						UP”.	TIME SEARCH
							INDEX SEARCH
Press the STOP/L button to select “AUTO CLOCK
						Then, press the F.FWD/B button.
CH SEARCH”.		– SETTING CLOCK –
Press the F.FWD/B button.	AUTO CLOCK			[ON]
						2 Begin auto preset
• The TV/VCR is now searching	B AUTO CLOCK CH SEARCH
	AUTO CLOCK CH			[ 02 ]			– CHANNEL SET UP –
	MANUAL CLOCK SET
for the station which contain the	D.S.T.			[OFF]		Press the PLAY/K or STOP/L but-
							ADD / DELETE CH (TV)
auto clock set signal. The search						ton to point to “AUTO PRESET”.	B AUTO PRESET
for a signal may take up to 20						Then, press the F.FWD/B button.
seconds per channel.	– AUTO CLOCK CH SEARCH –					The tuner scans and memorizes all
•“_ _” appears at the lower left of	08	10	13
						the active channels in your area.
the screen when the search has
ended.	_ _					3 After scanning
• Auto Clock station- write down the
						The tuner stops on the lowest memorized channel.
number(s) that appear on the screen. These are the
auto clock station(s) in your area. See item 4 below.
• If no number(s) appear on the TV screen, there are
						DELETING (OR ADDING)
no stations in your area which contain the Auto
						CHANNEL
Clock signal. Auto Clock Setting is not possible.
Please use Manual Clock Setting on page 11.						The channels you no longer receive or seldom watch
Press the MENU button to exit the screen.
						can be deleted from the memory. (Of course, you
NOTE: During Auto Clock CH Search, the picture
						can add the deleted channel into the memory again.)
may be distorted. This is normal.
					- 12 -		EN

9I03