NORMAL PLAYBACK
Make sure ...
•TV/VCR power must be turned on.
1Insert a prerecorded tape
If the
2 To begin playback | PLAY B |
Press the PLAY button.
Note: If any menu is activated on the screen, the PLAY button does not function. Press the MENU but-
ton to clear the menu, then press the PLAY button.
3To stop playback
Press the STOP button when playback is completed.
AUTO REPEAT PLAYBACK
The TV/VCR has an auto repeat function that allows you to repeat a tape indefinitely without touching the PLAY button.
ALL REPEAT: Repeat playback from the beginning to the end of the tape.
BLANK REPEAT: Repeat playback from the begin- ning to a blank part of more than 10 seconds.
TO CANCEL THE REPEAT PLAY MODE
Repeat steps [1] and [2], select [OFF] using the F.FWD/B or REW/s button on the remote control. Press the MENU button on the remote control to return to TV mode.
If there is a power failure of any kind, the unit will retain its memory for this feature.
SEARCH
PICTURE SEARCH
This feature is very useful in finding or skipping over a particular scene on a tape. In this mode, the sound will be muted.
1)You may view a video tape at a high speed in either a forward or reverse direction by pressing the F.FWD or REW button during playback (in the SP / LP / SLP modes).
2)Press it again and the TV/VCR will now search in super high speed (in the LP / SLP modes only). NOTE: Tapes recorded in the SP or LP mode will display a noise bar on the TV screen and the pic- ture may revert to Black and White. This is normal.
3)Press the PLAY button to return to normal speed.
ZERO RETURN
This function allows you to search easily a beginning point that you want to review by rewinding or fast forwarding.
NOTE:
1Select “USER’S SET UP”
Press the MENU button on the remote control.
Press the PLAY/K or STOP/L but- ton to point to “USER’S SET UP”. Then, press the F.FWD/B button.
– M E N U –
TIMER PROGRAMMING PICTURE CONTROL SETTING CLOCK CHANNEL SET UP
BUSER’S SET UP
TIME SEARCH INDEX SEARCH
Zero Return WILL NOT work on a blank tape or a blank portion of a tape.
1Stop a tape at your desired point
Rewind or fast forward the tape to the beginning point from which you want to review.
2 Select “ALL” or “BLANK” | – USER’S SET UP – | |
Press the PLAY/K or STOP/L but- | RENTAL | [OFF] |
ton to point to “REPEAT PLAY”. | B REPEAT PLAY | [ALL] |
AUTO RETURN | [OFF] | |
Press the F.FWD/B or REW/s button repeatedly until your desired selection [ALL] or [BLANK] appears.
3Exit the Repeat Play setting
Press the MENU button on the remote control to return to the TV mode.
4Start playback
Press the PLAY button to start the Repeat Play. ”REPEAT PLAY B” appears.
•Once you select the Repeat Play mode, it stays in effect even after you turn off the TV/VCR.
•If the Rental mode is set [ON], the “RENTAL PLAY B” display has priority.
2Reset the counter to 0:00:00
Press the COUNTER RESET button repeatedly.
3Begin recording or playback
Press the RECORD or PLAY button.
Press the STOP button when recording or playback is completed.
4To activate “ZERO RETURN”
–M E N U –
mode | TIMER PROGRAMMING |
PICTURE CONTROL | |
Press the MENU button on the | SETTING CLOCK |
CHANNEL SET UP | |
USER’S SET UP | |
remote control. | |
CAPTION [OFF] | |
| LANGUAGE [ENGLISH] |
Press the PLAY/K or STOP/L but- | B ZERO RETURN |
INDEX SEARCH | |
| TIME SEARCH |
ton to point to “ZERO RETURN”. |
|
Then, press the F.FWD/B button. |
|
The counter will appear on the TV screen.
The tape will automatically stop when the counter returns to 0:00:00.
- 18 - | EN |