Curtis Mathes CMC13003 owner manual Setting the Clock, Programming the Channels

TV OPERATION

Programming the Channels, continued

•When entering single-digit channels, press 0 first. For example, to select channel 8, press 0, then 8.

•When entering three-digit channels, press the +100 button on the remote control first. For example, to select channel 104, press +100, then press 0, then 4.

2Press MENU to display the menu.

3Press CH until “Setup” is highlighted.

4Press VOL+ to display the Setup menu.

5Press CH until “Add/Erase” is highlighted.

6If you want to:

•Add a channel: Press VOL+ or VOL– to display “Added.”

•Erase a channel: Press VOL+ or VOL– to display “Erased.”

You can still view a channel that is not stored in memory by using the number buttons to select the channel directly.

Setting the Clock

To record programs while you are away, or to use the sleep timer, you must first set the clock and calendar.

There are two ways to set the clock:

Option 1, Direct: The digits for hours and minutes are entered directly.

Option 2, Auto: The TV’s clock is synchornized to a time signal sent out by the local PBS channel.

1With the main menu displayed, press CH until “Time Set” is highlighted.

2Press VOL+.

The Time Set menu appears.

3Press VOL+ to activate the “Clock Set” and “Manual” field. (Note: Press VOL+ to alternate between “Manual” and “Auto”.)

Option 1: Setting the clock directly (“Manual” Method)

1Press the CH button to select the “Clock” field.

2Press VOL+ to activate the hour digits.

3Press CH or CH to set the current hour.

✔Be sure to set the correct time of day (am or pm), which appears to the right of the minutes.

12CHAPTER THREE: TV OPERATION