SPECIAL FEATURES
Using Block Repeat
Viewing Closed Captions
Block Repeat allows you to repeat a section of tape that you select. You can repeat this section of tape (the “block”) from one to ten times, or endlessly. “Repeat” section should be set up at a minimum
1With the VCR Setup menu on the screen, press CH to highlight “Block Repeat.”
Press VOL+ to select the number of times you want your “block” to repeat.
You can choose to have your “block” repeat from one to ten times, or endlessly.
2Press MENU twice to return to normal viewing.
3Insert and play a pre- recorded video tape.
4Press REPEAT at the beginning of the “block” you want to repeat. (“Repeat” does not appear on the screen when the button is pressed.)
5When you reach the end of the “block,” press REPEAT again.
The TV/VCR will rewind the tape to beginning of the block and repeat it.
The TV/VCR will repeat the block as many times as the number you set in step 1.
The word “Repeat” will appear on the screen.
6To stop block repeat, press the STOP, P./STILL, or POWER buttons. You can also cancel block repeat by fast forwarding or rewinding to a point outside of the “block.”
Your TV/VCR decodes and displays closed captions. These captions are usually subtitles for the hearing impaired or translations into another language. All VCRs record the closed caption signal from television programs, so home- recorded video tapes also provide closed captions.
✔Most
for this symbol in your television schedule and on tape packaging.
1With the main menu on the screen, press CH until “Closed Caption” is highlighted. Press VOL+.
2Press VOL+ to turn the closed caption feature on.
✔Misspellings and unusual characters sometimes appear in closed caption transmissions.
✔There may be a small delay before captions appear when you change channels.
3Press or CH to highlight, “Mode.” Press VOL+ to choose “Caption” or “Text.”
24CHAPTER FIVE: SPECIAL FEATURES