VCR OPERATION
Using Advanced Recording Features, continued
If you are recording a channel that comes through a cable converter box, enter the output number of the cable box.
5Use CH 
to highlight “Start Time.” Press VOL+.
7
The starting minute will blink. Use CH 
or CH 
to select the minute to begin recording. Press VOL+ to lock in the minute. Press CH 
to highlight “End Time.”
Press VOL+.
The Timer Record menu appears on the screen.
3Use the CH 
or CH 
buttons to select One Time Program, Daily Program, or Weekly Program.
Press VOL+.
The type of programming you choose will be displayed in the first line of the
The One Time Programming screen appears. Press VOL+. The channel number will blink.
The TV/VCR assigns a number
4Use CH 
or CH 
to select the channel you want to record. Press VOL+ to lock in the channel you’ve chosen.
✔If you make a mistake at any point during programming, press VOL–
and CH 
until the number you want to change is flashing, then enter the correct number.
The starting hour will blink. Use CH 
or CH 
to select the hour to begin recording.
6Press VOL+.
8
The ending hour will blink. Use CH 
or CH 
to select the hour to end recording.
Press VOL+.
20CHAPTER FOUR: VCR OPERATION