One-Touch Recording 27
A
●This function cannot be done from the remote control.
●Recording starts immediately when you press REC/OTR.
POWER | SLEEP/WAKE UP |
Before you begin, make sure ...
● The TV/VCR power is on and has a videotape with a |
|
| REW |
record tab. |
|
|
|
● If necessary, rewind or fast forward the tape to the point |
|
| MENU |
at which you want to begin recording. |
| 1 | |
|
| ||
|
| 4 | |
Press the Number buttons or CH(annel) o/p |
| 7 | |
to select the channel you want to record. |
|
|
|
1 Remember, if the TV/VCR is connected to a Cable | 2 | SPEED | |
Box or Satellite Receiver, the TV/VCR must be on |
|
| |
RECORD | |||
channel 3 or 4. Select the channel you want to record |
|
|
at the Cable Box/Satellite Receiver.
PLAY
| F.FWD |
| |
STOP |
|
| |
|
| H |
|
DISPLAY | ALT.C |
| |
8 | 9 |
| 1 |
2 | 3 |
|
|
5 | 6 | CH. |
|
|
| ||
0 | +100 | VOL. |
|
RESET | PAUSE/STILL |
|
|
| TIME SEARCH | MUTE |
|
2 Press SPEED to select a tape speed (SP/ SLP). Details are on page 10.
3 Press REC/OTR on the front of the TV/VCR to select a recording length. Each press of REC/OTR will increase the recording time by 30 minutes.You may select a maximum recording length of eight hours.
OTR (2:30)
3Press REC/OTR on the front of the TV/VCR.
SP
When recording finishes, the TV/VCR will turn itself off.
Helpful Hints
•To stop an OTR, press STOP/p.
•To show the remaining time, press DISPLAY. OTR and the remaining recording time will appear briefly.
•The maximum recording time of a
•If the tape ends before the recording’s end time, the TV/VCR will stop recording, eject the tape, and turn itself off.
•You can turn off the TV/VCR dur- ing an OTR.The recording will con- tinue at the length you set. The red REC/OTR light will flash dur- ing recording.