Hooking Up the TV/VCR (cont’d) 7
DHooking Up Your TV/VCR to Another Video Source (VCR, Camcorder, DVD Player, etc.)
You may need this connection if you want to copy tapes, view tapes playing on a VCR or Camcorder, or view Discs from a DVD Player. Select channel 00 (AUX) at the TV/VCR when viewing tapes/Discs playing on the VCR, Camcorder, or DVD Player.
AUDIO/VIDEO OUT Jacks on VCR (example)
3CH IN 4CH
AUDIO VIDEO
OUT ANT.
INOUT
Connect an Audio cable to the AUDIO OUT Jack on the VCR and to the AUDIO In Jack (white) on the front of the TV/VCR.
VIDEO AUDIO
3CH | IN | |
4CH | ||
|
AUDIO VIDEO
OUT ANT.
INOUT
AUDIO/VIDEO In Jacks
on front of TV/VCR
Connect a Video cable to the VIDEO OUT Jack on the VCR and to the VIDEO In Jack (yellow) on the front of the TV/VCR.
2 When all connections are complete, plug in the TV/VCR’s power cord.
Helpful Hints
•Before connecting an antenna or Cable TV or Satellite signal to the ANT(enna) Jack, make sure the pin is not bent. If the pin is bent, straighten it as illustrated.
•Audio and video cables are not supplied.
•If your VCR, Camcorder, or DVD Player has stereo Audio Out jacks (red and white), connect only the white jack to the TV/VCR’s white AUDIO In jack. Otherwise, you will need a
Bent pin
Crooked Pin | Straight Pin |