Zero Return,Time Search 31
Zero Return
Set the counter to zero at a location you want to reach later.
POWER | SLEEP/WAKE UP |
1 Play, rewind, or fast forward the tape to the location you would like to refer to later. Press STOP/▼ to stop the tape.
2 | Press RESET repeatedly to set the counter to |
0:00:00. |
3
REW
MENU
PLAY
STOP
DISPLAY
F.FWD | 1 |
ALT.CH |
3 When you later want to return to this point, press MENU. Press PLAY/▲ or STOP/▼ to select ZERO RETURN.Then, press F.FWD/B. The counter will appear on the screen briefly.When the counter reaches zero, the tape will stop. Press PLAY/▲ to watch the tape.
– M E N U –
TIMER PROGRAMMING
PICTURE CONTROL
SETTING CLOCK
CHANNEL SET UP
USER’S SET UP
LANGUAGE [ENGLISH]
CAPTION [OFF]
B ZERO RETURN
TIME SEARCH
Time Search
Time Search lets you rewind or fast forward a tape to a posi- tion by entering the amount of playback time you want to skip.
1 When a tape is in the TV/VCR, press TIME SEARCH. (You also can access TIME SEARCH in the main menu. Select TIME SEARCH, then press F.FWD/B.)
2 Press PLAY/▲ or STOP/▼ until your length of time appears (for example, 2:50 for 2 hours, 50 min- utes). Each press changes the time by 10 minutes.
To cancel the Time Search at this point, press MENU.
TIME SEARCH 2 : 50
3 Press REW/s or F.FWD/B. The TV/VCR will rewind or fast forward the tape by the specified amount of time.The time counts down on the screen as the search progresses.When 0:00 is reached, the tape will start playback automatically.
Or, to cancel the time search before it finishes, press STOP/▼.
1 | 2 | 3 |
4 | 5 | CH. |
6 |
2 | 7 | 8 | 9 |
|
|
| |||
|
| 0 | +100 | VOL. |
| SPEED | RESET | PAUSE/STILL |
|
| RECORD |
| TIME SEARCH | MUTE |
POWER | SLEEP/WAKE UP |
2-3 PLAY
| REW |
| F.FWD | |
|
| STOP |
| |
| MENU | DISPLAY | ALT.CH | |
| 1 | 2 | 3 |
|
| 4 | 5 | 6 | CH. |
|
| |||
| 7 | 8 | 9 |
|
|
| 0 | +100 | VOL. |
1 | SPEED | RESET | PAUSE/STILL |
|
RECORD |
| TIME SEARCH | MUTE |
Helpful Hints
•Time Search can be set up to a maximum of 9 hours 50 minutes (9:50) in