I N I T I A L S E T U P 12
AUTO TUNER SETUP
During Auto Tuner Setup, the TV will automatically scan through all available channels and memorize the active ones so that when you scan, you do not pick up weak or noisy channels.
Press any MENU button
To AUTO TUNER SETUP
To operate
TUNER MODE : CABLE AIR
START
To choose CABLE or AIR
To move to START
To start Auto Tuner Setup
NOW
PROGRAMMING!
48
The Programming takes approximately
1 to 2 minutes
CHANNEL SUMMARY
You can add or delete channels from channel scanning. You can also lock out any “unauthorized” viewers from one or up to all 181 channels.
Press any MENU Button
To CHANNEL SUMMARY
To operate
Note: Noise Muting will not work while you are in the Channel Summary menu.
SCAN
You can manually set channels to scan that were too weak to be picked up during Auto Tuner Setup. Conversely, if a channel was too weak to receive a good picture but was picked up anyway, delete it by removing the √. (If you have not performed the Auto Tuner Setup described in the previous column, please do so now.)
NOTES:
During Initial Setup, the TV will be programmed to only receive active channels. Once the channels are activated by the Auto Tuner Setup they will be includ- ed in Scan.
Some weak channels may be included or omitted during this procedure. You can add or delete any channels from scanning in the Channel Summary.
PROGRAMMING OVER!
Note: Noise Muting will not work while Auto Tuner Setup is working.
CH NO. | SCAN |
01
02√
03√
04√
05√
CH NO. SCAN
06√
07
08
09√
10√
CHANNEL
To the SCAN column
To add or delete from scan
EXIT when finished
Note: Channels set to scan will be marked with an √.
Note: Some cable systems experience interference from radio frequencies on Cable Channel 95. If you like, you can delete this channel from scanning by removing the √
Continued next page ...