13 I N I T I A L S E T U P
Continued …
CHANNEL GUARD - LOCK
To CHANNEL SUMMARY
To operate
CHANNEL +/- to select the channel
To the Lock column
The access code zero (0) to lock or unlock that channel
SET LOCK CODE
The Lock Code locks and unlocks Channel Guard settings. Write this four digit number down and keep it safe from potential viewers!
Press any MENU button
To SET LOCK CODE
To operate
CHNO. SCAN
01
02√
03√
04√
05√
CH NO. SCAN
06√
07
08
09√
10√
The padlock icon appears
ZERO (the access code is zero)
LOCK CODE | 0000 |
FINISH
EXIT when finished
Note: When viewing, once the Channel Guard for a specific channel has been unlocked, that channel will remain unlocked until power to the television is turned off. To reactivate Channel Guard, turn the power off and then on again.
CHANNEL GUARD MESSAGE:
This message appears when a viewer attempts to watch a guarded channel:
PLEASE ENTER LOCK CODE BY 10 KEY PAD TO UNLOCK IT.
NO.
To watch a channel you have locked, enter the lock code using the 10 key pad. An explanation of how to set the lock code appears in the next column on this page.
If the wrong lock code is entered, this message will flash on the screen:
To choose the number
To move to the next place
Continue to follow these directions for
all four numbers
To FINISH
To save settings and exit
EXIT when finished
Note: If you forget your Lock Code you can check your code by going to the setup screen of the Set Lock Code function.
Note: After a power interruption of more than 90 seconds you must reset the lock code.
INVALID LOCK CODE !