Magnavox 19MDTR20 owner manual Playing a Disc

Page 13

19MDTR20(1-49).QX33 03.3.28 11:52 Page 13

Before you begin, turn on the power of other equipment con- nected to the TV/VCR/DVD. Set a stereo (if applicable) to the correct sound source or channel. Details are on page 10.

1 Press STANDBY-ON to turn on the TV/VCR/DVD. The unit will be in TV/VCR mode. The red VCR/TV light will be on.

2 Press SELECT to put the TV/VCR/DVD in DVD mode. The green DVD light will appear on the front of the TV/VCR/DVD.

3 Press OPEN/CLOSE A on the front of the

TV/VCR/DVD to open the Disc tray.

4 Place a Disc into the tray.

Some DVDs are recorded on both sides. Make sure the label of the side you want to play is facing up.

Or, if the DVD is recorded on only one side, place the Disc in the tray with the label facing up and the shiny side facing down.

5 Press PLAY B. The tray will close and play will begin. If play does not start, press PLAY B again.

Or, you can press OPEN/CLOSE A or press the tray toward the unit to close the tray.

If a DVD Disc menu appears instead, see page 51. For MP3 and JPEG details, see page 66.

6 Press STOP C to stop play. If play remains stopped for five minutes, the DVD screen will dim. If play is stopped for 20 minutes with no activity at the TV/VCR/DVD, the unit will turn off.

Remember, only certain Discs will play.

See page six for details.

Playing a Disc 13

1

1

2

3

SELECT

2

 

STANDBY-ON PICTURE

SLEEP

 

 

 

 

 

CH.

 

 

4

5

6

 

 

 

7

8

9

 

 

 

 

 

+100

VOL.

5

 

 

0

+10

 

 

SPEED

C.RESET

ZOOM

 

 

 

PLAY

MUTE

 

 

STOP

 

6

 

RECORD

 

 

DISC

 

 

 

MENU

 

 

 

 

 

DISPLAY

 

 

 

 

 

 

 

ENTER

 

 

 

SETUP

TITLE

 

RETURN

 

 

CLEAR

SEARCH MODE REPEAT

REPEAT

 

 

 

 

 

A-B

 

 

MODE

AUDIO

SUBTITLE

ANGLE

 

3 Press OPEN/CLOSE A on the front of the TV/VCR/DVD.

4 Insert a Disc.

Helpful Hints

•If you turn off the unit in DVD mode, when you turn it on again, it will be in TV/VCR mode.

•An ‘’X” will appear on the screen when you try to access a feature that is not available.This is not a problem with the TV/VCR/DVD.

•If a Disc is dirty or scratched, the picture may be distorted or play may stop. Remove the Disc and try a different one.

•Press OPEN/CLOSE A (DVD) or PLAY B (DVD) on the front of the TV/VCR/DVD when the power is off.This turns on the unit in DVD mode (not TV/VCR mode).

•If a Disc has multiple layers, the picture may freeze occasionally. This happens when the first layer switches to the second layer.This is not a malfunction.

•Pressing SELECT during Disc play stops Disc play and switches the unit to TV/VCR mode. Pressing PLAY B (VCR) on the front of the unit during Disc play stops Disc play and starts tape play.

Page 12 Page 14
Image 13
Page 12 Page 14
Contents Color TV with BUILT-IN VCR 19MDTR20/27MDTR20For Customer Use Dear Magnavox product ownerModel No Serial No Safety Precautions Safety and General InformationDeclaration of Conformity Table of Contents Introduction Region Codes Playable DiscsColor Systems VideotapesBefore Using the TV/VCR/DVD Hooking Up the TV/VCR/DVD Indoor Antenna Hooking Up the TV/VCR/DVD cont’dNot supplied, example only Jacks on VCR example only Analog Stereo Hookups Optional Connections Digital Stereo Hookups Press VOL. / to adjust the volume First-Time Setup,Watching TVPlaying a Videotape Playing a Disc Remote Control Buttons Remote Control Buttons cont’d Front Panel Rear Panel Power CordANT. Jack Antenna Connect to a standard AC outlet 120V/60HzResetting TV Channels Menu Language, Resetting TV ChannelsPress Setup to exit the menu Press or to select Channel SET UP Then, press EnterAdding/Deleting Channels Press Setup when you are finishedTo delete another channel, repeat steps Manual Clock Setting Setting the ClockYou may have to reset the clock after a power failure Press or to select Manual Clock SET Then, press EnterWhile the DAY space is flashing, press or Setting the Clock cont’dUntil the correct day appears. Then, press B AppearTurn on the TV/VCR/DVD power Auto Clock SettingBefore you begin Turn on the Cable Box/Satellite Receiver if applicableTV/DVD/VCR will search for a channel that These channels when you enter your AutoWill appear at the top of the screen. Use one Clock CH at stepPress Setup to remove the menu Want to disable this featureDaylight-Savings Time Press or to select D.S.T. Then, pressStatus Displays Status Displays, Picture ControlsPicture Controls Press Display again to see the current timePut a videotape Videotape RecordingTape Speeds HrsOne-Touch Recording You cannot do an OTR with the remote controlPress REC/OTR on the front of the TV/VCR/DVD Before you begin, make sure Timer RecordingChannels are set. Details are on Then, press BFinally, press B Timer Recording cont’dOr, to record a program at the same time on Same channel every weekday MondayAM or PM will appear with the hour Correcting a Timer Recording Extending a Timer RecordingCancelling Timer Recordings To cancel a timer recording that is in progressEnter to choose OFF instead RETURN. To turn off Auto RETURN, pressRerecording Tape Duplication PLAY, press Enter to select OFF Repeat PlayPlay B will appear on the screen briefly Press or to select Rental Rental PlayPress Enter until on appears beside RENTAL. To turn off RENTAL, press Enter toSleep Timer Zero Return, Sleep TimerZero Return Press Sleep until Sleep 0 Minute appearsLength of time by 10 minutes Time SearchInsert a videotape Time Search will not operate dur- ing recordingIndex Search 0 Index SearchSlow Motion Videotape Playback FeaturesForward and Reverse Searching SP/LP/SLP Super High Speed Searching LP/SLPAutomatic Tracking Adjustment Automatic Operation FeaturesAutomatic Rewind, Eject, Off Manual TrackingClosed Captions Press Setup Press or to select CaptionTV Rating Settings Setting V-ChipTV Rating Explanations TV/VCR/DVD is onPress Setup to save your settings and remove the menus Setting V-Chip cont’dPress or to select the TV Rating level at Which you want to block viewing, then pressTV Rating Subratings Press Setup Press or to select V-CHIP SET UP Press EnterPress or to select TV Rating Press Enter When you select TV-Y7 Adjust. Then, press Enter twice to go to itsPress or L to select the rating you wish to SubratingsMpaa Rating Explanations Mpaa Rating SettingsPress or to select Mpaa Rating Then, press Enter V-CHIP SET UP screen will reappear Changing the Access CodeFour Xs will appear instead of the code to pro Press or to select Change Code Then, press EnterAppears in the top right corner of the screen. When a When a TV program is broadcast in stereo, StereoTV program is broadcast in second audio, SAP TV program is broadcast both in stereo and secondMulti-Channel Television Sound cont’d Press Setup to exit the menusSelecting HiFi or Monaural Sound Press or to select VCR AudioPress or to select TV Audio Press SETUP. Press or to select USER’SDisc Menus Disc Menus,Title MenusTitle Menus DVD’s Disc menu will appearOn the remote for two seconds During Disc play, press and hold i/g orTitle/Chapter Playback Title/Chapter Playback,Time PlaybackTime Playback Track Play Paused and Step-by-Step Play Paused and Step-by-Step Play, Resume OnResume On During Disc play, press F pauseOver. OFF will appear briefly on the TV screen Repeat PlayRegular play will resume Repeat play is not available with some DiscsPress Return to remove the display MarkersSubtitles Subtitles, Camera AnglesCamera Angles Zoom Slow Motion, ZoomOr 1/2 the normal speed Times the regular size. ZOOM3 will appearPress Setup twice while play is stopped Parental PasswordFirst time you set a password, this menu will appear If you have set a password before, this menu will appearScreen. Write down the password so you will not for Parental Password cont’dPower failure will not erase your password Press p to select CHANGE, then press EnterPress B to select Custom at the top Menu, then press Enter Parental LevelsPress B to select the lock, then press Parental Levels cont’d Stereo Sound Audio LanguageRandom Play Random Play, Programmed PlayProgrammed Play Random screen appearsTo stop play, press Stop C 66 MP3/JPEG PlaybackJpeg Files have the icon MP3 Files have the 3 iconMP3/JPEG Displays File name will appear when you first press DisplayPress Display again to remove the display Language menu Language SettingsLanguage Codes Language Settings cont’dPress B to select DISPLAY, then press Display SettingsIf you selected Angle ICON, press Enter Display Settings cont’dRepeatedly to turn Angle Icon on or OFF. Press B to select Audio , then press Audio SettingsDolby Digital sound must be available on the DVD DVD Display On-Screen DisplaysAudio CD Display Black Level Adjust Black Level to brighten the DVD pictureVirtual Surround Glossary Helpful Hints Helpful Hints cont’d Electrical Specifications SpecificationsOther Specifications General TV/VCR19MDTR20 should be carried in for repair Limited WarrantyModel # Serial # Magnavox, P.O. Box 520890, Miami, FL 33152 402Warranty Remote controlIndex Controls
Top Page Image Contents