Magnavox 19MDTR20 owner manual One-Touch Recording, Press REC/OTR on the front of the TV/VCR/DVD

Page 27

19MDTR20(1-49).QX33 03.3.28 11:52 Page 27

One-Touch Recording 27

A One-Touch Recording (OTR) is an immediate timed recording from 30 minutes to eight hours long.

Before you begin ...

Turn on the TV/VCR/DVD.

Press SELECT to put the unit in TV/VCR mode.

The red VCR/TV light will appear on the front of the unit.

Insert a videotape with its erase prevention tab in place. Details are on page seven. Rewind or fast forward the tape to the point at which you want to begin recording.

1 Press the Number buttons or CH. /to select the channel you want to record. Remember, if the TV/VCR/DVD is connected to a Cable Box/Satellite Receiver, the TV/VCR/DVD must be on channel 3, 4, or AUX.

Select the channel you want to record at the Cable Box/Satellite Receiver. Details are on page eight.

2 Press SPEED to select a tape recording speed (SP or SLP). Details are on page 26.

3 Press REC/OTR on the front of the TV/VCR/DVD repeatedly to select a recording length. Recording will start immediately.

Each press of REC/OTR will increase the recording time by 30 minutes. The maximum recording length is eight hours.

OTR (2:30)

SP

4 Press STOP C to stop a one-touch recording before its designated end time. Otherwise, recording will stop at the time you designated. The TV/VCR/DVD will turn off when the OTR ends.

 

STANDBY-ON PICTURE

SLEEP

SELECT

1

 

1

2

3

CH.

 

4

5

6

 

 

2

7

8

9

 

 

 

 

+100

VOL.

 

 

0

+10

 

 

 

 

 

 

 

SPEED

C.RESET

ZOOM

 

 

 

 

 

 

MUTE

4

 

 

PLAY

 

 

 

STOP

 

 

 

RECORD

 

 

DISC

 

 

 

 

MENU

 

 

DISPLAY

 

 

 

 

 

 

 

ENTER

 

 

 

SETUP

TITLE

 

RETURN

 

 

CLEAR

SEARCH MODE REPEAT

REPEAT

 

 

 

 

 

A-B

 

 

MODE

AUDIO

SUBTITLE

ANGLE

 

3 Press REC/OTR on the front of the TV/VCR/DVD.

Helpful Hints

You cannot do an OTR with the remote control.

To show the remaining recording time, press DISPLAY. OTR and the remaining recording time will appear briefly in the top left cor- ner of the screen.

If the tape ends before the recording’s end time, the TV/VCR/DVD will stop recording, eject the tape, and turn itself off.

An OTR will continue even if you turn off the TV/VCR/DVD.The red REC/OTR light will flash on the front of the TV/VCR/DVD to indi- cate recording is still in progress.

Image 27
Contents Color TV with BUILT-IN VCR 19MDTR20/27MDTR20Dear Magnavox product owner For Customer UseModel No Serial No Safety and General Information Safety PrecautionsDeclaration of Conformity Table of Contents Introduction Videotapes Playable DiscsRegion Codes Color SystemsBefore Using the TV/VCR/DVD Hooking Up the TV/VCR/DVD Jacks on VCR example only Hooking Up the TV/VCR/DVD cont’dIndoor Antenna Not supplied, example onlyOptional Connections Analog Stereo HookupsDigital Stereo Hookups Press VOL. / to adjust the volume First-Time Setup,Watching TVPlaying a Videotape Playing a Disc Remote Control Buttons Remote Control Buttons cont’d Front Panel Connect to a standard AC outlet 120V/60Hz Power CordRear Panel ANT. Jack AntennaPress or to select Channel SET UP Then, press Enter Menu Language, Resetting TV ChannelsResetting TV Channels Press Setup to exit the menuPress Setup when you are finished Adding/Deleting ChannelsTo delete another channel, repeat steps Press or to select Manual Clock SET Then, press Enter Setting the ClockManual Clock Setting You may have to reset the clock after a power failureAppear Setting the Clock cont’dWhile the DAY space is flashing, press or Until the correct day appears. Then, press BTurn on the Cable Box/Satellite Receiver if applicable Auto Clock SettingTurn on the TV/VCR/DVD power Before you beginClock CH at step These channels when you enter your AutoTV/DVD/VCR will search for a channel that Will appear at the top of the screen. Use one Press or to select D.S.T. Then, press Want to disable this feature Press Setup to remove the menu Daylight-Savings TimePress Display again to see the current time Status Displays, Picture ControlsStatus Displays Picture ControlsHrs Videotape RecordingPut a videotape Tape SpeedsYou cannot do an OTR with the remote control One-Touch RecordingPress REC/OTR on the front of the TV/VCR/DVD Then, press B Timer RecordingBefore you begin, make sure Channels are set. Details are onSame channel every weekday Monday Timer Recording cont’dFinally, press B Or, to record a program at the same time onAM or PM will appear with the hour To cancel a timer recording that is in progress Extending a Timer RecordingCorrecting a Timer Recording Cancelling Timer RecordingsEnter to choose OFF instead RETURN. To turn off Auto RETURN, pressRerecording Tape Duplication Repeat Play PLAY, press Enter to select OFFPlay B will appear on the screen briefly RENTAL. To turn off RENTAL, press Enter to Rental PlayPress or to select Rental Press Enter until on appears besidePress Sleep until Sleep 0 Minute appears Zero Return, Sleep TimerSleep Timer Zero ReturnTime Search will not operate dur- ing recording Time SearchLength of time by 10 minutes Insert a videotapeIndex Search 0 Index SearchSuper High Speed Searching LP/SLP Videotape Playback FeaturesSlow Motion Forward and Reverse Searching SP/LP/SLPManual Tracking Automatic Operation FeaturesAutomatic Tracking Adjustment Automatic Rewind, Eject, OffClosed Captions Press Setup Press or to select CaptionTV/VCR/DVD is on Setting V-ChipTV Rating Settings TV Rating ExplanationsWhich you want to block viewing, then press Setting V-Chip cont’dPress Setup to save your settings and remove the menus Press or to select the TV Rating level atPress Setup Press or to select V-CHIP SET UP Press Enter TV Rating SubratingsPress or to select TV Rating Press Enter Subratings Adjust. Then, press Enter twice to go to itsWhen you select TV-Y7 Press or L to select the rating you wish toMpaa Rating Settings Mpaa Rating ExplanationsPress or to select Mpaa Rating Then, press Enter Press or to select Change Code Then, press Enter Changing the Access CodeV-CHIP SET UP screen will reappear Four Xs will appear instead of the code to proTV program is broadcast both in stereo and second When a TV program is broadcast in stereo, StereoAppears in the top right corner of the screen. When a TV program is broadcast in second audio, SAPPress or to select VCR Audio Press Setup to exit the menusMulti-Channel Television Sound cont’d Selecting HiFi or Monaural SoundPress or to select TV Audio Press SETUP. Press or to select USER’SDVD’s Disc menu will appear Disc Menus,Title MenusDisc Menus Title MenusOn the remote for two seconds During Disc play, press and hold i/g orTitle/Chapter Playback,Time Playback Title/Chapter PlaybackTime Playback Track Play During Disc play, press F pause Paused and Step-by-Step Play, Resume OnPaused and Step-by-Step Play Resume OnRepeat play is not available with some Discs Repeat PlayOver. OFF will appear briefly on the TV screen Regular play will resumePress Return to remove the display MarkersSubtitles, Camera Angles SubtitlesCamera Angles Times the regular size. ZOOM3 will appear Slow Motion, ZoomZoom Or 1/2 the normal speedIf you have set a password before, this menu will appear Parental PasswordPress Setup twice while play is stopped First time you set a password, this menu will appearPress p to select CHANGE, then press Enter Parental Password cont’dScreen. Write down the password so you will not for Power failure will not erase your passwordParental Levels Press B to select Custom at the top Menu, then press EnterPress B to select the lock, then press Parental Levels cont’d Stereo Sound Audio LanguageRandom screen appears Random Play, Programmed PlayRandom Play Programmed PlayMP3 Files have the 3 icon 66 MP3/JPEG PlaybackTo stop play, press Stop C Jpeg Files have the iconFile name will appear when you first press Display MP3/JPEG DisplaysPress Display again to remove the display Language menu Language SettingsLanguage Codes Language Settings cont’dPress B to select DISPLAY, then press Display SettingsDisplay Settings cont’d If you selected Angle ICON, press EnterRepeatedly to turn Angle Icon on or OFF. Audio Settings Press B to select Audio , then pressDolby Digital sound must be available on the DVD On-Screen Displays DVD DisplayAudio CD Display Adjust Black Level to brighten the DVD picture Black LevelVirtual Surround Glossary Helpful Hints Helpful Hints cont’d General TV/VCR SpecificationsElectrical Specifications Other SpecificationsMagnavox, P.O. Box 520890, Miami, FL 33152 402 Limited Warranty19MDTR20 should be carried in for repair Model # Serial #Controls Remote controlWarranty Index