Magnavox 19MDTR20 Status Displays, Picture Controls, Press Display again to see the current time

Page 25

19MDTR20(1-49).QX33 03.3.28 11:52 Page 25

Status Displays, Picture Controls 25

Status Displays

To see the Videotape Counter, Clock, or Channel number on the screen in TV/VCR mode, press DISPLAY repeatedly. The following will occur when Closed Captions are OFF.

1 Press DISPLAY once to see the Videotape counter. After five seconds, only the counter will remain on the screen.

STOP

SP	COUNT 0:12:34	COUNT 0:12:39	1-2
Press DISPLAY again to see the current time			1-2
2 and TV channel. After five seconds, only the clock
and channel number will remain on the screen. To
clear them, press DISPLAY again.
STOP	5:40 PM	5:40 PM
	CH 2	CH 2

SP	1
● When Closed Captions are ON, the status displays will
appear for only five seconds. Then all the information will
clear from the screen. Closed Caption details are on page 41.
Picture Controls
Follow these steps to adjust the TV/VCR/DVD’s brightness,
sharpness, tint, color, or contrast.	2-3
1 Press PICTURE.	2-3
Within five seconds, press ▲ or ▼ to select the

2 picture control you want to adjust.

You can select BRIGHT, SHARPNESS, TINT, COLOR, or CONTRAST.

STANDBY-ON PICTURE SLEEP SELECT

1	2	3
			CH.
4	5	6
7	8	9
		+100	VOL.
	0	+10
SPEED	C.RESET	ZOOM
			MUTE
	PLAY
	STOP
RECORD			DISC
RECORD			MENU
DISPLAY
		ENTER
SETUP	TITLE		RETURN
CLEAR	SEARCH MODE REPEAT		REPEAT
			A-B
MODE	AUDIO	SUBTITLE	ANGLE

STANDBY-ON PICTURE SLEEP SELECT

1	2	3
			CH.
4	5	6
7	8	9
		+100	VOL.
	0	+10
SPEED	C.RESET	ZOOM
			MUTE
	PLAY
	STOP
RECORD			DISC
RECORD			MENU
DISPLAY
		ENTER
SETUP	TITLE		RETURN
CLEAR	SEARCH MODE REPEAT		REPEAT
			A-B
MODE	AUDIO	SUBTITLE	ANGLE

BRIGHT

3 Within five seconds, press s or B to adjust the picture control.

	s	B

BRIGHT	to decrease brightness	to increase brightness
SHARPNESS	to make soft	to make clear
TINT	to add purple	to add green
COLOR	to decrease color	to brighten color
CONTRAST	to decrease contrast	to increase contrast

Helpful Hint

•Degaussing: Magnetism from nearby appliances and speakers might affect the color of the TV picture. If this happens, move the TV/VCR/DVD away from the appliance. If the color is still not correct, turn off the power for 30 minutes (for 27MDTR20) or dis- connect the power cord for 30 minutes (19MDTR20). After 30 minutes, try using the unit again.

Image 25

Contents Color TV with BUILT-IN VCR 19MDTR20/27MDTR20For Customer Use Dear Magnavox product ownerModel No Serial No Safety Precautions Safety and General InformationDeclaration of Conformity Table of Contents Introduction Region Codes Playable DiscsColor Systems VideotapesBefore Using the TV/VCR/DVD Hooking Up the TV/VCR/DVD Indoor Antenna Hooking Up the TV/VCR/DVD cont’dNot supplied, example only Jacks on VCR example onlyAnalog Stereo Hookups Optional ConnectionsDigital Stereo Hookups Press VOL. / to adjust the volume First-Time Setup,Watching TVPlaying a Videotape Playing a Disc Remote Control Buttons Remote Control Buttons cont’d Front Panel Rear Panel Power CordANT. Jack Antenna Connect to a standard AC outlet 120V/60HzResetting TV Channels Menu Language, Resetting TV ChannelsPress Setup to exit the menu Press or to select Channel SET UP Then, press EnterAdding/Deleting Channels Press Setup when you are finishedTo delete another channel, repeat steps Manual Clock Setting Setting the ClockYou may have to reset the clock after a power failure Press or to select Manual Clock SET Then, press EnterWhile the DAY space is flashing, press or Setting the Clock cont’dUntil the correct day appears. Then, press B AppearTurn on the TV/VCR/DVD power Auto Clock SettingBefore you begin Turn on the Cable Box/Satellite Receiver if applicableTV/DVD/VCR will search for a channel that These channels when you enter your AutoWill appear at the top of the screen. Use one Clock CH at stepPress Setup to remove the menu Want to disable this featureDaylight-Savings Time Press or to select D.S.T. Then, pressStatus Displays Status Displays, Picture ControlsPicture Controls Press Display again to see the current timePut a videotape Videotape RecordingTape Speeds HrsOne-Touch Recording You cannot do an OTR with the remote controlPress REC/OTR on the front of the TV/VCR/DVD Before you begin, make sure Timer RecordingChannels are set. Details are on Then, press BFinally, press B Timer Recording cont’dOr, to record a program at the same time on Same channel every weekday MondayAM or PM will appear with the hour Correcting a Timer Recording Extending a Timer RecordingCancelling Timer Recordings To cancel a timer recording that is in progressEnter to choose OFF instead RETURN. To turn off Auto RETURN, pressRerecording Tape Duplication PLAY, press Enter to select OFF Repeat PlayPlay B will appear on the screen briefly Press or to select Rental Rental PlayPress Enter until on appears beside RENTAL. To turn off RENTAL, press Enter toSleep Timer Zero Return, Sleep TimerZero Return Press Sleep until Sleep 0 Minute appearsLength of time by 10 minutes Time SearchInsert a videotape Time Search will not operate dur- ing recordingIndex Search 0 Index SearchSlow Motion Videotape Playback FeaturesForward and Reverse Searching SP/LP/SLP Super High Speed Searching LP/SLPAutomatic Tracking Adjustment Automatic Operation FeaturesAutomatic Rewind, Eject, Off Manual TrackingClosed Captions Press Setup Press or to select CaptionTV Rating Settings Setting V-ChipTV Rating Explanations TV/VCR/DVD is onPress Setup to save your settings and remove the menus Setting V-Chip cont’dPress or to select the TV Rating level at Which you want to block viewing, then pressTV Rating Subratings Press Setup Press or to select V-CHIP SET UP Press EnterPress or to select TV Rating Press Enter When you select TV-Y7 Adjust. Then, press Enter twice to go to itsPress or L to select the rating you wish to SubratingsMpaa Rating Explanations Mpaa Rating SettingsPress or to select Mpaa Rating Then, press Enter V-CHIP SET UP screen will reappear Changing the Access CodeFour Xs will appear instead of the code to pro Press or to select Change Code Then, press EnterAppears in the top right corner of the screen. When a When a TV program is broadcast in stereo, StereoTV program is broadcast in second audio, SAP TV program is broadcast both in stereo and secondMulti-Channel Television Sound cont’d Press Setup to exit the menusSelecting HiFi or Monaural Sound Press or to select VCR AudioPress or to select TV Audio Press SETUP. Press or to select USER’SDisc Menus Disc Menus,Title MenusTitle Menus DVD’s Disc menu will appearOn the remote for two seconds During Disc play, press and hold i/g orTitle/Chapter Playback Title/Chapter Playback,Time PlaybackTime Playback Track Play Paused and Step-by-Step Play Paused and Step-by-Step Play, Resume OnResume On During Disc play, press F pauseOver. OFF will appear briefly on the TV screen Repeat PlayRegular play will resume Repeat play is not available with some DiscsPress Return to remove the display MarkersSubtitles Subtitles, Camera AnglesCamera Angles Zoom Slow Motion, ZoomOr 1/2 the normal speed Times the regular size. ZOOM3 will appearPress Setup twice while play is stopped Parental PasswordFirst time you set a password, this menu will appear If you have set a password before, this menu will appearScreen. Write down the password so you will not for Parental Password cont’dPower failure will not erase your password Press p to select CHANGE, then press EnterPress B to select Custom at the top Menu, then press Enter Parental LevelsPress B to select the lock, then press Parental Levels cont’d Stereo Sound Audio LanguageRandom Play Random Play, Programmed PlayProgrammed Play Random screen appearsTo stop play, press Stop C 66 MP3/JPEG PlaybackJpeg Files have the icon MP3 Files have the 3 iconMP3/JPEG Displays File name will appear when you first press DisplayPress Display again to remove the display Language menu Language SettingsLanguage Codes Language Settings cont’dPress B to select DISPLAY, then press Display SettingsIf you selected Angle ICON, press Enter Display Settings cont’dRepeatedly to turn Angle Icon on or OFF. Press B to select Audio , then press Audio SettingsDolby Digital sound must be available on the DVD DVD Display On-Screen DisplaysAudio CD Display Black Level Adjust Black Level to brighten the DVD pictureVirtual Surround Glossary Helpful Hints Helpful Hints cont’d Electrical Specifications SpecificationsOther Specifications General TV/VCR19MDTR20 should be carried in for repair Limited WarrantyModel # Serial # Magnavox, P.O. Box 520890, Miami, FL 33152 402Warranty Remote controlIndex Controls