Magnavox 19MDTR20 owner manual General TV/VCR, General DVD, Electrical Specifications

Page 78

19MDTR20(50-80).QX33 03.3.28 11:59 Page 78

78 Specifications

General TV/VCR

CRT:

19MDTR20:

19 inch in-line gun,

 

90˚ deflection tube

27MDTR20:

27 inch in-line gun,

 

110˚ deflection tube

Closed Caption system: §15.119/FCC

Video Heads:

Rotary four-head

Tape width:

1/2 inch

Tape speeds

 

SP

33.40 mm/sec.

LP

16.67 mm/sec.

SLP

11.12 mm/sec.

Tuner channels:

2-69

Cable TV:

1-125

General DVD

Color System:

NTSC

Frequency response:

 

DVD (linear sound)

20 Hz to 22 kHz

 

(sample rate: 48 kHz)

 

20 Hz to 44 kHz

 

(sample rate: 96 kHz)

Audio CD

20 Hz to 20 kHz

Signal-to-noise ratio:

 

Audio CD

100 dB (EIAJ)

Dynamic range:

 

DVD (linear sound):

85 dB

Audio CD:

84 dB (EIAJ)

Total distortion factor

 

Audio CD:

0.07% (EIAJ)

Wow and flutter:

Below the measurement

 

limitation (+/-0.001%

 

W PEAK) (EIAJ)

Electrical Specifications

Sound output: Two speakers, 1W, 8 ohm

Other Specifications

Terminals

 

Antenna In:

VHF/UHF/Cable TV

 

75 ohm unbalanced (F-type)

Video In:

One RCA connector

Audio L/R In:

Two RCA connectors

Headphone:

1/8” stereo (3.5 mm)

Coaxial Digital

 

Audio Out:

One pin jack,

 

500m Vpp (75 ohm)

Audio L/R Out:

Two RCA connectors

Operating

 

temperature:

41ºF-104ºF (5ºC-40ºC)

Power requirements:

AC 120V, 60Hz

19MDTR20:

 

Power consumption

 

(Maximum):

90W

Dimensions:

Height: 19-11/16” (500 mm)

 

Width: 23-13/16” (605 mm)

 

Depth: 18-11/16” (474 mm)

Weight:

48.5 lbs (22 kg)

27MDTR20:

 

Power consumption

 

(Maximum):

125W

Dimensions:

Height: 25-1/2” (648 mm)

 

Width: 26-9/16” (675 mm)

 

Depth: 19-11/16” (500 mm)

Weight:

86 lbs (39 kg)

Accessories:

Remote Control with two

 

AA batteries

 

Owner’s Manual

Designs and specifications are subject to change without notice and without our legal obligation.

Image 78
Contents 19MDTR20/27MDTR20 Color TV with BUILT-IN VCRDear Magnavox product owner For Customer UseModel No Serial No Safety and General Information Safety PrecautionsDeclaration of Conformity Table of Contents Introduction Color Systems Playable DiscsRegion Codes VideotapesBefore Using the TV/VCR/DVD Hooking Up the TV/VCR/DVD Not supplied, example only Hooking Up the TV/VCR/DVD cont’dIndoor Antenna Jacks on VCR example onlyOptional Connections Analog Stereo HookupsDigital Stereo Hookups First-Time Setup,Watching TV Press VOL. / to adjust the volumePlaying a Videotape Playing a Disc Remote Control Buttons Remote Control Buttons cont’d Front Panel ANT. Jack Antenna Power CordRear Panel Connect to a standard AC outlet 120V/60HzPress Setup to exit the menu Menu Language, Resetting TV ChannelsResetting TV Channels Press or to select Channel SET UP Then, press EnterPress Setup when you are finished Adding/Deleting ChannelsTo delete another channel, repeat steps You may have to reset the clock after a power failure Setting the ClockManual Clock Setting Press or to select Manual Clock SET Then, press EnterUntil the correct day appears. Then, press B Setting the Clock cont’dWhile the DAY space is flashing, press or AppearBefore you begin Auto Clock SettingTurn on the TV/VCR/DVD power Turn on the Cable Box/Satellite Receiver if applicableWill appear at the top of the screen. Use one These channels when you enter your AutoTV/DVD/VCR will search for a channel that Clock CH at stepDaylight-Savings Time Want to disable this featurePress Setup to remove the menu Press or to select D.S.T. Then, pressPicture Controls Status Displays, Picture ControlsStatus Displays Press Display again to see the current timeTape Speeds Videotape RecordingPut a videotape HrsYou cannot do an OTR with the remote control One-Touch RecordingPress REC/OTR on the front of the TV/VCR/DVD Channels are set. Details are on Timer RecordingBefore you begin, make sure Then, press BOr, to record a program at the same time on Timer Recording cont’dFinally, press B Same channel every weekday MondayAM or PM will appear with the hour Cancelling Timer Recordings Extending a Timer RecordingCorrecting a Timer Recording To cancel a timer recording that is in progressRETURN. To turn off Auto RETURN, press Enter to choose OFF insteadRerecording Tape Duplication Repeat Play PLAY, press Enter to select OFFPlay B will appear on the screen briefly Press Enter until on appears beside Rental PlayPress or to select Rental RENTAL. To turn off RENTAL, press Enter toZero Return Zero Return, Sleep TimerSleep Timer Press Sleep until Sleep 0 Minute appearsInsert a videotape Time SearchLength of time by 10 minutes Time Search will not operate dur- ing recordingIndex Search Index Search 0Forward and Reverse Searching SP/LP/SLP Videotape Playback FeaturesSlow Motion Super High Speed Searching LP/SLPAutomatic Rewind, Eject, Off Automatic Operation FeaturesAutomatic Tracking Adjustment Manual TrackingPress Setup Press or to select Caption Closed CaptionsTV Rating Explanations Setting V-ChipTV Rating Settings TV/VCR/DVD is onPress or to select the TV Rating level at Setting V-Chip cont’dPress Setup to save your settings and remove the menus Which you want to block viewing, then pressPress Setup Press or to select V-CHIP SET UP Press Enter TV Rating SubratingsPress or to select TV Rating Press Enter Press or L to select the rating you wish to Adjust. Then, press Enter twice to go to itsWhen you select TV-Y7 SubratingsMpaa Rating Settings Mpaa Rating ExplanationsPress or to select Mpaa Rating Then, press Enter Four Xs will appear instead of the code to pro Changing the Access CodeV-CHIP SET UP screen will reappear Press or to select Change Code Then, press EnterTV program is broadcast in second audio, SAP When a TV program is broadcast in stereo, StereoAppears in the top right corner of the screen. When a TV program is broadcast both in stereo and secondSelecting HiFi or Monaural Sound Press Setup to exit the menusMulti-Channel Television Sound cont’d Press or to select VCR AudioPress SETUP. Press or to select USER’S Press or to select TV AudioTitle Menus Disc Menus,Title MenusDisc Menus DVD’s Disc menu will appearDuring Disc play, press and hold i/g or On the remote for two secondsTitle/Chapter Playback,Time Playback Title/Chapter PlaybackTime Playback Track Play Resume On Paused and Step-by-Step Play, Resume OnPaused and Step-by-Step Play During Disc play, press F pauseRegular play will resume Repeat PlayOver. OFF will appear briefly on the TV screen Repeat play is not available with some DiscsMarkers Press Return to remove the displaySubtitles, Camera Angles SubtitlesCamera Angles Or 1/2 the normal speed Slow Motion, ZoomZoom Times the regular size. ZOOM3 will appearFirst time you set a password, this menu will appear Parental PasswordPress Setup twice while play is stopped If you have set a password before, this menu will appearPower failure will not erase your password Parental Password cont’dScreen. Write down the password so you will not for Press p to select CHANGE, then press EnterParental Levels Press B to select Custom at the top Menu, then press EnterPress B to select the lock, then press Parental Levels cont’d Audio Language Stereo SoundProgrammed Play Random Play, Programmed PlayRandom Play Random screen appearsJpeg Files have the icon 66 MP3/JPEG PlaybackTo stop play, press Stop C MP3 Files have the 3 iconFile name will appear when you first press Display MP3/JPEG DisplaysPress Display again to remove the display Language Settings Language menuLanguage Settings cont’d Language CodesDisplay Settings Press B to select DISPLAY, then pressDisplay Settings cont’d If you selected Angle ICON, press EnterRepeatedly to turn Angle Icon on or OFF. Audio Settings Press B to select Audio , then pressDolby Digital sound must be available on the DVD On-Screen Displays DVD DisplayAudio CD Display Adjust Black Level to brighten the DVD picture Black LevelVirtual Surround Glossary Helpful Hints Helpful Hints cont’d Other Specifications SpecificationsElectrical Specifications General TV/VCRModel # Serial # Limited Warranty19MDTR20 should be carried in for repair Magnavox, P.O. Box 520890, Miami, FL 33152 402Index Remote controlWarranty Controls