TV Operation To Memorize Channels | Memorex MVT2140, MVT2139

TV OPERATION

TO MEMORIZE CHANNELS

Captions: This Closed Caption Mode will display text on the screen in English or another language (depending on the setting of the Closed Captions CH. 1 or 2). Generally, Closed Captions in English are transmitted on Captions Channel 1 and Closed Captions in other languages are transmitted on Captions Channel 2.

Text: The Text Closed Caption Mode will usually fill the screen with a programming schedule or other information. After selecting a Closed Caption Mode, it will stay in effect until it is changed, even if the channel is changed. If the Captions signal is lost due to a commercial or a break in the signal, the Captions will reappear when the signal is received again. If the channels are changed, the Captions will be delayed approximately 10 seconds. The Captions will appear in places on the screen where they will least interfere with the picture, usually on the bottom of the screen. News programs will usually show three-line Closed Captions which scroll onto the screen. Most other shows provide two or three lined Captions placed near the character who is speaking so the viewer can follow the dialogue.

Words in italics or underlined describe titles, words in foreign languages or words requiring emphasis. Words that are sung usually appear enclosed by musical notes. For television programs broadcasting with Closed Cap- tions, look in your TV guide for the Closed Captions symbol (CC).

•	When selecting Closed Captions, the captioning will
	be delayed approximately 10 seconds.
•	If no caption signal is received, no captions will
	appear, but the television will remain in the Caption
	Mode.
•	When Captions are being displayed, on-screen
	displays, such as volume and mute may not be seen
	or may interfere with Closed Captions.
•	Misspellings or unusual characters may occasionally
	appear during Closed Captioning. This is normal with
	Closed Captioning, especially with live programs. This
	is because during live programs, captions are also
	entered live. These transmissions do not allow time for

This TV/VCR is equipped with a channel memory feature which allows channels to skip up or down to the next channel set into memory, skipping over unwanted channels. Before selecting channels, they must be programmed into the TV/VCR’s memory. In addition to normal VHF and UHF channels, this TV/ VCR can receive up to 113 Cable TV channels. To use this TV/VCR with an antenna, set the TV/CATV menu option to the TV mode. When shipped from the factory, this menu option is in the CATV mode.

TV/CATV SELECTION

1 Press the MENU button.						M E N U
2 Press the SET/TRACKING + or						TIMER REC SET
						TV SET-UP
						TV SET-UP
						CH SET-UP
						CH SET-UP
	– button to select the CH SET-UP					AUTO REPEAT ON OFF
						AUTO REPEAT ON OFF
						SYSTEM SET-UP


	mode, then press the ENTER				〈 +/–/ENTER/MENU〉
	button.				〈 +/–/ENTER/MENU〉
	button.
	VHF/UHF/CATV CHANNELS
		TV		CATV
		VHF		VHF
		2-13	2-13
		UHF	STD/HRC/IRC
		14-69	14-36		(A) (W)
			37-59 (AA) (WW)
			60-85		(AAA) (ZZZ)
			86-94		(86) (94)
			95-99		(A-5) (A-1)
			100-125		(100)(125)
			01		(5A)
3 Press the SET/TRACKING + or						CH SET-UP
	– button to select the TV/CATV					TV CATV
						AUTO CH MEMORY
						AUTO CH MEMORY
	mode.					ADD/DELETE



4 Press the ENTER button to					〈 +/–/ENTER/MENU〉
	select the TV or CATV mode.				〈 +/–/ENTER/MENU〉
	select the TV or CATV mode.
	The arrow indicates the selected
	mode.

	TV	- VHF/UHF channels
	CATV - CABLE TV channels

5Press the MENU button until the MENU screen is cleared.

AUTOMATIC MEMORY TUNING

editing.

• Some cable systems and copy protection systems

may interfere with the Closed Captioned signal.

• If using an indoor antenna or if TV reception is very

poor, the Closed Caption Decoder may not appear or

may appear with strange characters or misspelled

words. In this case, adjust the antenna for better

reception or use an outdoor antenna.

1Press the MENU button.

2Press the SET/TRACKING + or

–button to select the CH SET-UP mode, then press the ENTER button.

3Press the SET/TRACKING + or

–button to select the AUTO CH MEMORY mode, then press the ENTER button. The TV/VCR will begin memorizing all the chan- nels available in your area. Channel numbers will remain red until auto memorizing is complete.

M E N U

TIMER REC SET