Memorex MVT2139, MVT2140 Picture Control Adjustments, To display the picture adjustment

TIMER REC SET

TV SET-UP

CH SET-UP

AUTO REPEAT ON OFF

SYSTEM SET-UP

〈 +/–/ENTER/MENU〉

TV SET-UP

ON/OFF TIMER

PICTURE

〈 +/— /ENTER/MENU〉

BRIGHTNESS 0

〈 +/–/ENTER/CANCEL/MENU〉

CONTRAST 32

〈 +/–/ENTER/CANCEL/MENU〉

PICTURE CONTROL ADJUSTMENTS

Picture controls are factory preset but you can adjust them individually as follows:

1 To display the picture adjustment M E N U

screen, press the MENU button. Press the SET/TRACKING + or – button to select the TV SET-UP option, then press the ENTER button.

COLOR

Press the ENTER button until “COLOR” appears on the screen, then press the SET/TRACKING + or

–button to adjust the color intensity of the picture. The control should be set when colors appear normal in intensity and brilliance.

COLOR 0

〈+/–/ENTER/CANCEL/MENU〉

ENGLISH

2Press the SET/TRACKING + or –

button to select the PICTURE option, then press the ENTER button.

BRIGHTNESS

TINT
Press the ENTER button until “TINT”
appears on the screen, then press
the SET/TRACKING + or – button to
adjust the tint of the picture. This	TINT	0

determines how accurately the	〈 +/–/ENTER/CANCEL/MENU〉
colors are reproduced by the TV.

Adjusting the tint for natural facial tone is the best method of obtaining accurate color reproduction of the entire picture.

Press the ENTER button until “BRIGHTNESS” appears on the screen, then press the SET/ TRACKING + or – button to adjust the brightness of the picture. When the SET/TRACKING + button is pressed, the darker portions of the picture become lighter.

SHARPNESS

Press the ENTER button until “SHARPNESS” appears on the screen, then press the SET/ TRACKING + or – button to adjust the sharpness of the picture.

SHARPNESS 0

CONTRAST

Press the ENTER button until “CONTRAST” appears on the screen, then press the SET/TRACKING + or – button to adjust the contrast of the picture. Pictures look sharpest in the daytime (bright light) by increasing the contrast. At night

(dim light), the sharpest picture is obtained by reducing the contrast.

NOTE: The CONTRAST default setting is set to maximum at the factory.

〈 +/–/ENTER/CANCEL/MENU〉

CANCEL

Pressing the CANCEL button while making picture adjustments will return all adjustments to the factory preset levels.

NOTE: The On-screen display will disappear 6 seconds after finishing an adjustment or by pressing the MENU button three times. The settings can only be adjusted when they are displayed on the TV screen.

19

5A3B201A E P12-19 19 11/4/02, 12:43 PM