Memorex MVT2140, MVT2139 owner manual ONE-TOUCH Timer Recording OTR

ONE-TOUCH TIMER

RECORDING (OTR)

The One-Touch Timer Recording feature provides a simple and convenient way to make a timed recording.

EXAMPLE: One-touch Timer Recording for 30 minutes.

1Press the POWER button to turn on the TV/VCR.

2Load a video cassette with the erase prevention tab intact.

3Press the SPEED button to select the desired tape speed (SP or SLP). SP or SLP will appear on the screen.

			00:00:00 SP
4 Set the TV/CATV option to the
appropriate setting (See page 16).
	TV	- VHF/UHF channels
	CATV	- CABLE TV channels

5Press the Direct Channel Selection buttons or CHANNEL Up or Down button to select the channel to be recorded.

6 Press the REC/OTR button to		OTR 0 : 30
begin recording. Press the button		CH 012
again to stop recording after 30
minutes. Each additional press of
the REC/OTR button will increase
recording time as shown below,
up to a maximum of 5 hours.
“OTR” will appear on the screen.
NOTES: • Press the REC/OTR	Press	Recording time
	once	NORMAL REC
button to increase the
	twice	0:30
time needed for recording
	3 times	1:00
(See the chart right).
	4 times	1:30
• To cancel OTR, press
	5 times	2:00
the STOP button.
	6 times	3:00
• The TV/VCR channel
	7 times	4:00
cannot be changed
during recording.	8 times	5:00
	9 times	NORMAL REC

TIMER RECORDING

Timer recording can be programmed on-screen with the remote control. The built-in timer allows automatic unattended recording of up to 8 programs within 1 month.

EXAMPLE: Program a timer recording for 23rd day, channel

007 (CATV), 7:00 - 9:30 PM (Tape speed : SLP).

•Load a video cassette with the erase prevention tab intact. The TV/VCR will automatically turn on.

•Set the TV/CATV selection to the appropriate position (See page 16).

1	Press the MENU button.		M E N U
			TIMER REC SET
2	Check the TIMER REC SET		TV SET-UP
			CH SET-UP
			AUTO REPEAT ON OFF
	option is selected, then press		SYSTEM SET-UP
	the ENTER button.	〈 +/–/ENTER/MENU〉

22

TIMER RECORDING

3Press the SET/TRACKING + or –

button to select the PROGRAM -------	:-- --	:-- --- -
	:-- --	:-- --- -
position, then press the ENTER -------	:-- --	:-- --- -
	:-- --	:-- --- -
button.-------	:-- --	:-- --- -
	:-- --	:-- --- -
----- --	:-- --	:-- --- -
----- --	:-- --	:-- --- -

〈 +/–/ENTER/CANCEL/MENU〉

4Press the SET/TRACKING + or –

button to select the date, then	TIMER REC SET
press the ENTER button.	DATE	23	(THU)
	START	8	: 30 AM
	END	-- : --
	CH	012
	SPEED	SP

〈 +/–/ENTER/CANCEL/MENU〉

5Set the start time, end time,

channel and tape speed as in step 4.

TIMER REC SET			23 TH 7:00PM	9:30PM 007 SLP
			----- --:--	--:-- --- -
DATE	23	(THU)	----- --:--	--:-- --- -
START	7	: 00 PM	----- --:--	--:-- --- -
END	9	: 30 PM	----- --:--	--:-- --- -
CH	007		----- --:--	--:-- --- -
SPEED	SLP		----- --:--	--:-- --- -
〈 +/–/ENTER/CANCEL/MENU〉			----- --:--	--:-- --- -
			〈 +/–/ENTER/CANCEL/MENU〉

6To set the timer for another program, press the SET/ TRACKING + or – button until the number of the second program blinks, then press the ENTER button. Repeat steps 4 to 5 to set the second pro- gram.

7Press the TIMER REC button. The T-REC indicator will light. The Timer is programed, when the programed time is reached, the recording is automatically started.

To cancel timer recording, press the button again and T-REC indicator will go out.

NOTES: • If programming is performed without a tape in the TV/VCR, or with a tape without an erase prevention tab, the Timer Recording is not possible. If a tape without an erase prevention tab is in the TV/VCR, the tape will be ejected.

•To record from the external equipment press the SET/TRACKING + or – button repeatedly until "L 1 (from AUDIO/VIDEO LINE1 jacks on the rear)" or "L 2 (from AUDIO/VIDEO IN jacks on the front)" appears when setting the channel in step 5.

•The VCR section cannot be used while the T-REC indicator is lit. If you want to use the VCR operation, press the TIMER REC button to deactivate the timer.

•After a power failure or disconnection of the power plug, all programmed recording setting and time display will be lost upon resumption of power. In this case, reset the clock (see pages 13-14) and reprogram any timer recordings.

•If you want to correct the digits while setting, press the CANCEL button until the item you want to correct, then press the SET/TRACKING + or – button to correct the desired setting.

5A3B201A E P20-Back 22 11/4/02, 12:43 PM