LOCATION OF CONTROLS
FRONT | REAR |
1
23 4 5
| Volume |
|
|
|
|
| Channel | Stop/ | Rew | Play | F.Fwd Rec/Otr |
Phones | Power | Eject |
|
|
|
20
| VIDEO |
UHF/ | AUDIO |
VHF |
|
OUT | LINE1 |
6 7 8 | 16 17 | 18 | 19 |
Power Rec/Otr
Video – In – Audio
9 | 10 11 | 12 | 13 | 14 | 15 |
DESCRIPTION OF CONTROLS
FRONT:
1.Cassette Loading Slot - To insert or remove a video tape.
2.POWER Button - Press to turn the TV/VCR on or off.
3.STOP/EJECT Button - Press once to stop the tape in any mode. Press again to eject the tape.
4.PLAY Button - Press to play a prerecorded tape.
5.REC/OTR Button - Press once to start normal recording. Additional presses activate
6.POWER Indicator - Lights when the power is turned on.
7.REC/OTR Indicator - Lights when the TV/VCR is recording.
8.
9.PHONES Jack - Plug monaural headphones or an earphone with an 1/8" miniplug into this jack for private listening.
10.VOLUME ▲ / ▼ Buttons - Press to raise or lower the volume of the sound.
11.CHANNEL ▲ / ▼ Buttons - Press to select a channel for viewing or recording.
8
12.REW (Rewind) Button - In the Stop mode, this button rapidly winds the tape backwards. In the Play mode, this button activates reverse search.
13.F.FWD (Fast Forward) Button - In the Stop mode, this button rapidly winds the tape forward. In the Play mode, this button activates forward search.
14.Remote Sensor - Signals from the Remote Control are received here.
15.Audio/Video In Jacks - Audio and video signal cables from an external source can be connected here.
REAR:
16.VHF/UHF Antenna Jack - Connect the 75 ohm coaxial cable from the antenna or Cable TV service to this jack.
17.AUDIO/VIDEO OUT Jacks - Used to output audio and video signals to a TV, amplifier or VCR.
18.AUDIO/VIDEO IN (LINE 1) Jacks - Audio and video signal cables from an external source can be connected here.
19.AC Power Cord - Connect to a 120V, 60Hz outlet.
20.DC Input Jack - Connect the 12V DC car cord (supplied) here for DC operation.
5A3B201A E | 8 | 11/4/02, 12:41 PM |