Manual | MUSIC ON THE MS300 |
MS300 User’s |
|
and the MS300.
•To control power on and power off for the Kenwood changer you must connect the 1/8” male to male cable between the
Connecting Pioneer CD/DVD Changers (CDs Only)
The MS300 requires that you connect each changer to the back panel using audio and control cables.
Follow these steps to connect your Pioneer
1.A custom
2.Connect one end of the
3.Connect the other end of the
4.Locate the stereo RCA audio patch cable.
5.Connect one end of the RCA audio cable into the Analog In jacks number 1 on the back of your MS300
6.Connect the other end of the RCA audio cable into the Analog Audio Out jacks on the back of your changer.
• If you have more than one changer, repeat these steps to connect the additional changers to communications
PAGE 24