McIntosh UR12 Device Buttons, Favorite Channel Button, Erase Function, Punch through Functions

Page 17

System Settings

Device Buttons

1.Select one of the twelve Device But- tons you wish to store macro functions with the cursor on DEVICE BUTTON.

2.Move the cursor to COMMON BUT- TON and select again either the same or another device button whose func- tional buttons you wish to store in the device Macro Touch-button you se- lected first. You can store up to 14 commands into the device Macro Touch-buttons.

3.Store the commands you selected to the Macro Touch-button by pressing CH (UP) Push-button. To cancel the macro commands, press CH (DOWN) Push-button.

Favorite Channel Button

1.Select the device you wish to program Favorite Channels with the cursor on

COMMON BUTTON.

2.Select one of the Favorite Channel Touch-buttons and enter the channel number you wish to store in the FA- VORITE Channel Touch-button. You can store up to 14 commands.

3.Store the commands you selected in the Favorite channel button by press- ing Channel UP button. To cancel the macro commands, press CH (DOWN). Once you complete the macro pro- gramming and wish to exit, press both the MAIN and PAGE buttons simulta- neously. This will take you to the set- ting mode. Move the cursor to 8. TO

EXIT in setting mode and press the cursor down to exit or simply press the MAIN button to exit to main menu.

Note: Pressing the Volume Up button during the macro programming will add a time delay of 0.5 seconds between the commands (e.g. Pressing the Volume Up button twice will cause a pause of 1 second between the commands where the delay was inserted).

Erase Function

To erase a Macro, Device or Favorite Channel Programmed Function that has been stored, press the Channel UP Push- button without entering any commands during the above Programming Modes.

Punch through Functions

You can use audio receiver volume control in a different mode (eg. Audio receiver Volume Up and Volume Down and Mute in Satellite Mode) using a volume Punch- through feature. You can also have four VCR (or DVD) transport buttons, Play, Stop, Fast Forward and Rewind, operate in another mode such as in Satellite, Cable and Audio modes. You can also make CHANNEL Punch-through.

Programming Punch-through

1.Press PUNCH THROUGH in the Touch Screen in 2. SYSTEMS & OP- TIONS Mode.

2.Press VOLUME UP button for Volume Punch Through or press the PLAY but- ton for Transport Punch Through or

17

Page 16 Page 18
Image 17
Page 16 Page 18
Contents Owner’s Manual UR12 Touch Screen RemoteGeneral InstallationCare of Equipment Repair of EquipmentThank You Customer ServicePlease Take a Moment Serial Number Purchase Date Dealer NameGeneral Notes Table of ContentsIntroduction Introduction and Performance FeaturesPerformance Features Installing Batteries Initial Start-up Touch Screen and Push-buttons How to Operate the Remote Control Input Source Selection Touch Screen MenuTuner Functions MAC Touch Screen Pages Touch Screen MenuEnter HomeSpeakers 1 Power On and OffMode Mono/Stereo Touch Screen Contrast Entering the System Settings Overview Clock Setting System SettingsTouch Screen Alignment Systems and OptionsM1, M2 and M3 Buttons Introduction Macro and Punch Through ProgrammingFavorite Channel Button Device ButtonsErase Function Punch through FunctionsPreprogram Using a three-digit code numberAuto Scan with Brand Names Learning Method Main button to exit to the main menuErasing the Learned Buttons Buttons in the next page by press- ing the page buttonDevice Touch-button, move the cursor to Device Button Press the Main button to exit to the main menu Edit Touch-buttonsMoving Touch Buttons You desire, push the joystick down to save itDelete Touch Buttons Copy Touch ButtonsCreating a Favorite Device Inserting Touch-buttons Select Insert button in Editing modeChanging Touch-buttons Press Change button in Editing ModeEditing Touch-button Text Select Text Edit button in Edit# % & ‘ * + , . / 0 1 2 3 4 5 6 7 8 9 = ? @ Port on the computer Setting the Date and ClockProgram Loading Erasing all the Programs When LV Touch Screen Menu is selected CH Up When Cable Touch Screen Menu is selected DeleteSearch RandomAlternate Button Functions Audio Devices Manufacturer/Brand Set-Up Code NumberManufacturer/Brand Set-Up Code Number Auxiliary Devices Auxiliary Devices Manufacturer/Brand Set-Up Code Number CD Devices Setup Code TableManufacturer/Brand Set-Up Code Number Cable Devices CD Devices Manufacturer/Brand Set-Up Code Number LV Devices Manufacturer/Brand Set-Up Code Number DVD DevicesLV Devices Manufacturer/Brand Set-Up Code Number TV Devices Manufacturer/Brand Set-Up Code Number SAT DevicesManufacturer/Brand Set-Up Code Number Tape Devices TV Devices 197 003 024 056 059 060 063 064 164 VCR Devices Setup Code Table Packing Instructions Specifications and Packing InstructionsRemote Control Products ONE Year Limited Warranty What McIntosh will do under the Warranty Scope and Duration of WarrantyLimitations on McIntosh’s Obligations under the Warranty Geographical LimitationsWhat the Owner must Pay For Parts and Occurrences that are not Covered by the Warranty
Top Page Image Contents