McIntosh UR12 manual Device Touch-button, move the cursor to Device Button

Page 22

in the Device Touch-button, move the cursor to DEVICE BUTTON.

4.Press the functional button or Device Touch-button you wish to erase for three seconds or more and it will flash “ERASED”. Repeat this step for other buttons you wish to erase.

5.Once you completed erasing and wish to exit from this mode, press the MAIN button to go back to the main page of the learning mode. Exit from the Main page by pressing both the MAIN and PAGE buttons simulta- neously.

6.You will be in the setting mode once again. Move the cursor to 8. TO EXIT and press down the cursor or simply press the MAIN button to exit to the main menu.

Erase all the learned commands in a single device

1.Go to the program setting mode by pressing both the MAIN and PAGE buttons simultaneously for five sec- onds.

2.Move the cursor to 4. LEARNING with the joystick and then push the joystick down to enter the learning mode.

3.Press the MUTE button to move the cursor to the DEVICE BUTTON and keep the Device Touch-button you wish to erase all the learned com- mands down for five seconds until the Touch-button shows ERASED. This will erase the function taught in the Device Touch-button. If you continue

to press the Device Touch-button for another five seconds, it will erase all the functions in the device.

4.Once you complete the erasing and wish to exit from this mode, press the MAIN button to go back to the main page of the learning mode. Exit from the Main page by pressing the MAIN and PAGE buttons simultaneously.

5.You will be in the setting mode once again. Move the cursor to 8. TO EXIT and press down the cursor or simply press the MAIN button to exit to the main menu.

Erase all the learned commands in all twelve devices

1.Go to the program setting mode by pressing both the MAIN and PAGE buttons simultaneously for five sec- onds.

2.Move the cursor to 4. LEARNING with the joystick and then push the joystick down to enter the learning mode.

3.Press both the POWER and STOP but- tons simultaneously for five seconds in the learning mode. The Touch-button will show ERASED after it erased all the learned commands in the remote control.

4.Once you complete the erasing and wish to exit from this mode, press both the MAIN and PAGE buttons simulta- neously.

5.You will be in the setting mode once again. Move the cursor to 8. TO EXIT and press down the cursor or simply

22

Image 22
Contents UR12 Touch Screen Remote Owner’s ManualCare of Equipment InstallationGeneral Repair of EquipmentPlease Take a Moment Customer ServiceThank You Serial Number Purchase Date Dealer NameTable of Contents General NotesPerformance Features Introduction and Performance FeaturesIntroduction Installing Batteries Initial Start-up Touch Screen and Push-buttons How to Operate the Remote Control Touch Screen Menu Input Source SelectionMAC Touch Screen Pages Touch Screen Menu Tuner FunctionsHome EnterMode Power On and OffSpeakers 1 Mono/StereoOverview Entering the System SettingsTouch Screen Contrast Touch Screen Alignment System SettingsClock Setting Systems and OptionsIntroduction Macro and Punch Through Programming M1, M2 and M3 ButtonsErase Function Device ButtonsFavorite Channel Button Punch through FunctionsUsing a three-digit code number PreprogramAuto Scan with Brand Names Main button to exit to the main menu Learning MethodButtons in the next page by press- ing the page button Erasing the Learned ButtonsDevice Touch-button, move the cursor to Device Button Moving Touch Buttons Edit Touch-buttonsPress the Main button to exit to the main menu You desire, push the joystick down to save itCreating a Favorite Device Copy Touch ButtonsDelete Touch Buttons Select Insert button in Editing mode Inserting Touch-buttonsEditing Touch-button Text Press Change button in Editing ModeChanging Touch-buttons Select Text Edit button in Edit# % & ‘ * + , . / 0 1 2 3 4 5 6 7 8 9 = ? @ Program Loading Setting the Date and ClockPort on the computer Erasing all the Programs Search When Cable Touch Screen Menu is selected DeleteWhen LV Touch Screen Menu is selected CH Up RandomAlternate Button Functions Manufacturer/Brand Set-Up Code Number Audio DevicesManufacturer/Brand Set-Up Code Number Auxiliary Devices Auxiliary Devices Manufacturer/Brand Set-Up Code Number Cable Devices Setup Code TableManufacturer/Brand Set-Up Code Number CD Devices CD Devices Manufacturer/Brand Set-Up Code Number DVD Devices Manufacturer/Brand Set-Up Code Number LV DevicesLV Devices Manufacturer/Brand Set-Up Code Number Tape Devices Manufacturer/Brand Set-Up Code Number SAT DevicesManufacturer/Brand Set-Up Code Number TV Devices TV Devices 197 003 024 056 059 060 063 064 164 VCR Devices Setup Code Table Specifications and Packing Instructions Packing InstructionsRemote Control Products ONE Year Limited Warranty Limitations on McIntosh’s Obligations under the Warranty Scope and Duration of WarrantyWhat McIntosh will do under the Warranty Geographical LimitationsParts and Occurrences that are not Covered by the Warranty What the Owner must Pay For