How to Connect to Anynet
Using a Samsung
Connecting the FM and AM Antennas ENG
What is Anynet?
•The Anynet function allows you to use your Samsung TV's remote control and menu to control all AV devices.
•However, this function is available only with Samsung
Use this to connect |
devices. |
If AM reception is poor, connect an outdoor AM antenna(not supplied).
FM Antenna (supplied)
AM Loop Antenna (supplied)
Snap the tabs on the loop into the slots of the base to assemble the AM loop antenna.
CONNECTIONS
1 Connect the Anynet input terminal on the back of this unit to your Samsung TV's Anynet output terminal.
2 Connect the Anynet Out Terminal on the back of this unit to the Anynet input of Samsung external AV devices.
3 Refer to the user's manual of your
FM antenna connection
1.Connect the FM antenna supplied to the FM 75Ω COAXIAL terminal.
2.Slowly move the antenna wire around until you find a location where reception is good, then fasten it to a wall or other rigid surface.
AM antenna connection
1.Connect the AM loop antenna supplied
to the AM and terminals.
2.If reception is poor, connect an outdoor single
*This function is available only with Samsung
Caution | • | If the Anynet input and output terminals are reversed, communication with the TV will fail and |
|
| you will not be able to use the Anynet function. |
Cooling Fan | The cooling fan supplies cool air to the unit to prevent overheating. |
Please observe the following cautions for your safety.
• Make sure the unit is
• Do not obstruct the cooling fan or ventilation holes. (If the cooling fan or ventilation holes are covered with a newspaper or cloth, heat may build up inside the unit and fire may result.)
19 | 20 |