Disc Playback
1 Press OPEN/CLOSE button to open the disc tray.
2 Load a disc.
• Place a disc gently into the tray with the disc’s label facing up.
3 Press DISC SKIP button.
• Rotate the carousel tray so you can load the third, fourth, and fifth discs.
4 Close the compartment by pressing the OPEN/CLOSE button again.
DVD VCD CD
• Playback starts automatically.
Note | • | Depending on the content of the disc, the initial screen may appear different. | |
• | Depending on the recording mode, some | ||
| |||
| • | Table of contents of a |
Selecting a Disc in the Disc changer | ENG |
|
The DVD/CD function is automatically selected when Disc Skip is pushed.
To select a specific disc, press the corresponding DIRECT PLAY (1, 2, 3, 4, 5) buttons on the front panel or DISC SKIP on the remote control, until the required disc indicator flashes.
•If the disc selected is not loaded, the next disc is played automatically.
To stop playback, press STOP during playback. | OPERATION | ||||||||
| |||||||||
• If pressed once, “PRESS PLAY” is displayed and the stop position will be stored in memory. |
| ||||||||
If PLAY/PAUSE ( |
|
|
| ) button or ENTER button is pressed, playback resumes from the stop position. |
| ||||
|
|
| |||||||
(This function works only with DVDs.) |
|
|
|
|
| ||||
• If pressed twice, “STOP” is displayed, and if PLAY/PAUSE ( |
|
|
| ) button is pressed, playback starts from the |
| ||||
|
|
| |||||||
beginning. |
|
|
|
|
|
|
|
|
|
To temporarily pause playback, press PLAY/PAUSE during playback.
• To resume playback, press PLAY/PAUSE ( 
) button again.
23 | 24 |
