Nortel Networks 553-3001-211 Specifications, QPC430 and QPC723 interfaces, Download parameters

NT7D16 Data Access card Page 485 of 894

In the following example, <GT> is the Guard Time and <EC> the Escape Character defined in the S2 register. The example shows the Off Line escape sequence, the command to display an S register (Ring Count, in this case), and the command to go back on line and attend to the answered call.

<GT><EC><EC><EC><GT

OK

ATS1

005

OK

ATO0

CONNECT

Specifications

QPC430 and QPC723 interfaces

The NT7D16 Data Access card provides the same features as the QPC430 four-port Asynchronous Interface Line Card (AILC) and the QPC723 RS-232 Interface Line Card (RILC). The operational mode for each port is determined in LD 11.

Download parameters

These parameters are configured in the system through service change operations. They are then downloaded to the DAC. For a complete description of the service change procedures, see the Software Input/Output: Administration (553-3001-311).

Circuit Card Description and Installation