Nortel Networks 553-3001-211 Display History Pause, Display Performance, Display Status Pause

Page 218 of 894 NT5D11 and NT5D14 Lineside T1 Interface cards

Table 83

MMI commands and command sets (Part 2 of 3)

Command	Description
D C	Display Configuration
	Displays the configuration settings for the cards including:
	• the serial number of the card
	•	MMI firmware version
	•	date and time
	•	alarm enable/disable setting
	• self-clearing enable/disable setting
	• settings entered in Set Configuration
	•	dip switch settings
D H [P]	Display History [Pause]
	Displays performance counters for the past 24 hours.
D P	Display Performance
	Displays performance counters for the current hour.
D S [P]	Display Status [Pause]
	Displays carrier status, including whether the card is in the alarm state, and what
	alarm level is currently active.
H or ?	Help
	Displays the help screen.

LLogin

Logs into the MMI terminal when the system has one lineside T1 card.

QQuit

Logs the terminal user out. If multiple lineside T1 cards share a single terminal, logout after using the MMI. Because of the shared daisy-chained link, if a lineside T1 card is logged in, it occupies the bus and no other lineside T1 cards are able to notify the MMI of alarms.

553-3001-211 Standard 2.00 September 2004