Nortel Networks 553-3001-211 manual DDP2

Page 350 of 894 NT5D97 Dual-port DTI2/PRI2 card

Figure 78

Clock Controller – Option 4

		Clock Controller
		for CPU 0
	DDP2	J1	Sec.
Primary	Primary Ref 1	J2	Prim.
	clk 0
Reference	Port 0
	Primary Ref 2
	clk 1
Secondary	Secondary Ref 1	Clock Controller
	Clk0
Reference	Port 1	for CPU 1
	Secondary Ref 2	J1	Sec.
	Clk1
		J2	Prim.
	Both references from both ports
		553-7402

Case 1 - The two ports of a QPC414 network card are connected to two digital trunks.

In this case, the QPC414 and the two digital trunks are replaced by a single DDP2 card, which is plugged into the network shelf in the QPC414 slot.

Case 2 - One port of the QPC414 card is connected to a digital trunk, and the second is connected to a peripheral buffer. Both cards are in network loop location.

In this case, the QPC414 should not be removed. The digital trunk is removed and the DDP2 card is plugged into one of the two empty slots.

553-3001-211 Standard 2.00 September 2004