Nortel Networks 553-3001-211 Printing the card parameters LD, Print out example Part 1, Or R-422

NT7D16 Data Access card Page 509 of 894

Printing the card parameters (LD 20)

By responding R232, R422, or DAC to the TYPE prompt in LD 20, you can print out the configured parameters for each port, or the entire DAC. This is useful to determine if any parameters have been altered during keyboard or Hayes dialing modify procedures.

LD 20 – Print DAC parameters.

Prompt	Response	Description
REQ:	PRT	Print data, TN, or unit information for the unit specified
	LTN
	LUU
TYPE:	R232	Print information for the RS-232-C, RS-422 ports, or the
	R422	whole DAC
	DAC
TN	l s c u	Print information for this TN, where l = loop, s = shelf,
		c = card, u = unit. Uploaded parameters can only be
		printed when a specific TN is listed.

The operation parameter printout for an RS-232 or RS-422 port is similar to the following, depending on the configuration.

Table 167

Print out example (Part 1 of 2)

	DBASE	UPLOAD
	R-232 or R-422	R-232 or R-422
PAR	SPAC	SPAC
DTR	ON	ON
HOT	OFF	OFF
AUT	ON	O

Note: The Upload parameters are printed only when a single TN is specified.

Circuit Card Description and Installation