Nortel Networks 553-3001-211 manual Xxxxxxx CR

Page 466 of 894 NT7D16 Data Access card

if the access code is less than the maximum number of digits allowed for the Speed Call list for the associated data DN (DDN).

Note: If the Speed Call feature key is not defined in the software, you

will be notified by the following: Feature key Speed Call not defined.

Both the Autodial and Speed Call commands can be changed with the Modify command (M). Additionally, the Speed Call number can be changed in the service change. When this command is entered, the Modify menu appears.

Modify Menu:

A - Auto Number D - DCD Control

L - Long Break M - Manual Answer

Q - Quit Modify Menu R - Remote Loopback

S - Speed Call

CTRL Z (Abort Keyboard Dialing)

Select:<SP>

Any of these choices leads to another series of prompts and responses.

By entering A on the keyboard, you enter the Autodial Modify menu. Respond to the following prompts to change the Autodial number.

A <CR>

Current Autodial number: zzzzzzz

Enter Autodial number: <SP>

xxxxxxx <CR>

New Autodial number: xxxxxxx

553-3001-211 Standard 2.00 September 2004