Nortel Networks 553-3001-211 manual 854 of 894 QPC513 Enhanced Serial Data Interface card

Page 854 of 894 QPC513 Enhanced Serial Data Interface card

parameters. These parameters must be set for each ports if both ports are being used.

LD 17 – Serial port configuration parameters.

Prompt	Response	Description
REQ:	CHG	Change configuration.
TYPE:	CFN	Configuration type.
IOTB	YES	Change input/output devices.
ADAN	NEW TTY x	Define a new system terminal (printer) port as device x, where
	NEW PRT x	x = 0 to 15.
CDNO	1-16	Use the ESDI card number to keep track of all ports.
DENS	DDEN	Double density SDI paddle board.
USER	xxx	Enter the user of port x. The values that can be entered
		depend on the software being used. See the Software Input/
		Output: Administration (553-3001-311) for details.
XSM	(NO) YES	Port is used for the system monitor.

553-3001-211 Standard 2.00 September 2004