![Finalize under-cabinet installation](/images/new-backgrounds/64958/6495827x1.webp)
Finalize under-cabinet installation
Installation
Microwav e Oven
13/16" |
•With template secured in place, check again that hole center lines on Template 2 are straight, and that distance from right to left hole center measures distance shown on template.
•Drill mounting holes:
–Use of safety glasses is recommended to protect the eyes.
–Empty cabinet and remove delicate items from adjacent cabinets.
–Use center punch or nail to make an indentation for centering the drill bit.
–Holding drill straight, drill through Template 2 at the four black drilling holes indicated on template.
–Remove template and clean drill holes.
•Select four
•Hold each bolt against cabinet front rail.
•Select bolt that extends beyond top of bottom shelf by 3/16" to 13/16".
–Correct bolt length is important. If bolt is too short, it won’t reach oven; if bolt is too long, oven will not be drawn up tight to cabinet.
•From inside cabinet, insert four bolts, all same length, through mounting straps and then into drilled holes of cabinet shelf.
•Place solid support, such as a stack of books, under oven to raise it close to cabinet bottom.
•Align mounting holes on oven with bolts.
•Lift oven, and insert bolts into mounting holes.
•Tighten bolts alternately to draw oven up evenly and secure it to cabinet bottom.
•Remove oven’s rubber feet and save for future use.
•Plug power cord into receptacle.
14