GE Monogram Micr owave Oven, Installation Preparation, ZEM200WV With single oven

ZEM200WV With single oven

ZEM200WV Under-cabinet mounting

Installation Preparation

Micr owave Oven

Refer to diagram at right

for dimensions when

installing ZEM200WV

above a Monogram

single oven.

Note: Trim kit JX827WN is required for installation above a single oven.

Within opening of appropriate dimensions:

•Install a level base of plywood:

–Flush with lower edge of opening.

–Entirely covering floor of opening.

•3/8" thick (min.) plywood must be supported by 2" x 4" or 1" x 2" equivalent runners on all four sides.

•Finished floor must support a minimum of 100 pounds.

•Assemble JX827WN accessory kit, refer to “Installation” for details.

The ZEM200WV may be installed under virtually any cabinetry and is supplied with all hardware necessary for under-cabinet installation. Cabinet bottom must be capable of supporting an additional 90 pounds. Refer to “Advance Planning” for more details.

5