Nortel Networks 553-3001-211 manual Ring Again

NT7D16 Data Access card Page 469 of 894

By entering L on the keyboard, you enter the Long Break Detect Modify menu. Respond to the following prompts to enable or disable the detection of the Long Break as an abandon signal.

L <CR>

Long Break:Detected

Ignored

Detect Long Break? (Y/N): <SP>

Y <CR> N <CR>

Long Break: Detected Long Break: Ignored

To exit the Modify menu, enter Q. This entry returns you to the Primary commands menu. To view the port's parameters, enter D when in the Primary Commands menu. This display shows the Display Options menu.

Display Options Menu:

A - Auto Dial number D - Date and Time

K - Feature Keys P - Data Port Parameters

Q - Quit Display S - Speed Call number(s)

CTRL Z (Abort Keyboard Dialing)

Select: <SP>

Ring Again

When a call is placed to a busy DN, the DAC prompts you to activate Ring Again. The Ring Again feature alerts you as soon as the dialed DN becomes free. Once the Ring Again has been activated, you will return to the Primary Commands menu. The following is the prompt and response sequence enabling the Ring Again feature.

Circuit Card Description and Installation