Nortel Networks 553-3001-211 manual NT6D80 Multi-purpose Serial Data Link card

Page 116 of 894 Option settings

NT6D80 Multi-purpose Serial Data Link card

Table 29

NT6D80 Multi-purpose Serial Data Link card

	Port 0—SW4	Port 0—SW8
RS-232-D DTE or DCE*	all off	all off
RS-422-A DTE (terminal)	all off	all on
RS-422-A DCE (modem)	all on	all off

	Port 1—SW3	Port 1—SW7
RS-232-D DTE or DCE*	all off	all off
RS-422-A DTE	all off	all on
RS-422-A DCE	all on	all off

	Port 2—SW2	Port 2—SW6
RS-232-D DTE or DCE*	all off	all off
RS-422-A DTE	all off	all on
RS-422-A DCE	all on	all off

	Port 3—SW1	Port 3—SW5
RS-232-D DTE or DCE*	all off	all off
RS-422-A DTE	all off	all on
RS-422-A DCE	all on	all off

* RS-232-D DTE and DCE modes are software configured. RS-422-A DTE and DEC modes are switch configured.

Note: The device number for the MSDL card is configured in LD17 at the prompt DNUM. You must also set the device number, using switches S9 and S10, on the MSDL card. S9 designates ones and S10 designates tens. To set the device number as 14, for example, set S10 to 1 and S9 to 4.

553-3001-211 Standard 2.00 September 2004