Nortel Networks 553-3001-211 manual Prompt Response Description

Page 506 of 894 NT7D16 Data Access card

required. The defaults are bracketed, and may be issued by Carriage Return (<CR>).

LD 11 – Configure Data Access card. (Part 1 of 3)

Prompt	Response	Description
REQ:	NEW CHG MOV	Add, change, move or copy the unit
	COPY
TYPE:	R232	RS-232-C unit
	R422	RS-422 unit
TN	l s c u	DAC data TN. The loop (LL) must be a superloop.
RNPG	<CR>	Ringing number pickup group (default to zero)
CLS		Class of Service allowed for the DAC.
	DTA	Data Allowed
	ADD	Digit Display Allowed
TOV	(0) - 3	Timeout value, where:
		0 = no timeout
		1 = 15 minutes
		2 = 30 minutes
		3 = 60 minutes
OPE	(NO) YES	Operation parameter change
PAR	(SPAC) ODD EVEN	SPAC = space parity
	MARK	ODD = odd parity
		EVEN = even parity
		MARK = mark parity
DTR	(OFF) ON	DTR settings, where:
		ON = forced DTR
		OFF = dynamic DTR
		This prompt appears only if TYPE = R232

553-3001-211 Standard 2.00 September 2004