Nortel Networks 553-3001-211 manual Basic commands, Quit

Page 216 of 894 NT5D11 and NT5D14 Lineside T1 Interface cards

The MMI then prompts for a password. The password is “LTILINK”, and it must be typed all in capital letters.

After logging in, the prompt will then look like this:

•LTI:::> for single-card installations

•LTI:ss cc> for multi-card installations, where ss represents the two-digit address, and cc represents the two-digit card slot address

Basic commands

MMI commands can now be executed. There are seven basic commands that can be combined together to form a total of 19 command sets. They are:

•Alarm

•Clear

•Display

•Set

•Test

•Help

•Quit

If ?<CR> is typed, the MMI will list the above commands along with an explanation of their usage A screen similar to the following will appear. The help screen can also appear by typing H<CR>, or HELP<CR>.

ALARM	USAGE: Alarm [Enable Disable]
CLEAR	USAGE: Clear [Alarm] [Error counter] [Log]
DISPLAY	USAGE: Display [Alarm Status Perform
	History] [Pause]
HELP	USAGE: Help ?
SET	USAGE: Set [Time Date Alarm Clearing
	Name Memory]
TEST	USAGE: Test [Carrier All]
QUIT	USAGE: Quit

553-3001-211 Standard 2.00 September 2004