Nortel Networks 553-3001-211 manual Reference clock cables, MSDL/DCH cables External DCH cable

NT5D97 Dual-port DTI2/PRI2 card Page 323 of 894

Table 115

NTCK79AA cable pins (Part 2 of 2)

				DDP2
Cable	Name	Description	Color	pins	NCTE pins
1		Outer metallized PVC	Bare	N/C	P1 Case
		shield
1		3 stranded wire	Bare	N/C	P1 Case

Reference clock cables

The NTCG03AA (14 ft), NTCG03AB (2.8 ft), NTCG03AC (4.0 ft), or NTCG03AD (7 ft), is a DDP2 card to Clock Controller cable, connecting each of the CLK0 or CLK1 ports on the DDP2 faceplate to the primary or secondary source ports on Clock Controller card 0 or 1.

Figure 67

NTCG03AA/AB/AC/AD

P1

2.8, 4, 7 or 14 ft.

P2

Connector P1 - 4 pin, male, RJ11 (DDP2 faceplate) Connector P2 - 9 pin, male, D-type (Clock Controller)

Note: Includes an RJ11Ö9 pin D-type adaptor.

553-7384

MSDL/DCH cables

External DCH cable

The NTCK46 cable connects the DDP2 card to the NT6D11AF/NT5K75AA/ NT5K35AA D-Channel Handler card. The cable is available in four different sizes:

•NTCK46AA (6 ft.) - DDP2 to DCH cable

•NTCK46AB (18 ft.) - DDP2 to DCH cable

Circuit Card Description and Installation