Nortel Networks 553-3001-211 Dlng ENG FRN, KBD On OFF, Wire OFF on, Pbdo OFF on, Key, Trn, Rga

Page 508 of 894 NT7D16 Data Access card

LD 11 – Configure Data Access card. (Part 3 of 3)

Prompt	Response	Description
DLNG	(ENG) FRN	Data port language, where:
		ENG = English
		FRN = Quebec French
KBD	(ON) OFF	Keyboard dialing, where:
		ON = enabled
		OFF = disabled (Hayes dialing commands will still work)
WIRE	(OFF) ON	Wire test mode, where:
		OFF = disabled
		ON = enabled
PBDO	(OFF) ON	Port busy upon DTR off, where:
		OFF = disabled (port busy on with DTR)
		ON = enabled (port busy off with DTR)
		This prompt appears only if TYPE = R232
		PBDO = OFF for any RS-232-C mode besides 8, or 12
		If PBDO = ON, key 7 = MSB
KEY		Key settings
	0 SCR xxxx	Primary data DN
	1 SCR xxxx	Secondary Data DN
	2 TRN	Call Transfer
	3 ADL yy xxxx	Autodial
	4 RGA	Ring Again
	5 SCC 0-253	Speed Call Controller, list number
	6 DSP	Display
	7 MSB	Make Set Busy
		Primary and secondary data DNs must be single
		appearance DNs. Feature key assignment must be as
		shown here.

553-3001-211 Standard 2.00 September 2004