Nortel Networks 553-3001-211 manual TRK l s c u, Call or Call l s c u

Page 94 of 894 Acceptance tests

3End the session in LD 30:

****

End of Procedure

Trunk cards

Use the following procedures to test a trunk card.

Procedure 8

Testing a trunk card using a maintenance telephone

1Access the system from a maintenance telephone.

See “Communicating with the Meridian 1” in the Software Input/Output: Administration (553-3001-311) for details on accessing the system from a maintenance telephone.

2Test the trunk unit:

LD 36
TRK l s c u	loop, shelf, card, and unit numbers

3If the maintenance telephone is hooked up to a monitor and the system response is other than OK, see the Software Input/Output: Administration (553-3001-311) to analyze the messages.

End of Procedure

Procedure 9

Testing a trunk card using a system terminal

1Log into the system: LOGI (password)

2Enter:

LD 36

3To test a trunk from a remote test center, seize a central office (CO) monitor trunk:

CALL or

CALL l s c u

Seize the automatic number identification (ANI) trunk:

TRK l s c u loop, shelf, card, and unit numbers

553-3001-211 Standard 2.00 September 2004