Nortel Networks 553-3001-211 manual Procedure Testing line cards, Untt l s c

Acceptance tests Page 91 of 894

Line cards

Procedure 4

Testing line cards

Use this procedure to test a line card.

1Log into the system: LOGI (password)

2Perform a network memory test, continuity test, and signaling test on a specific loop and shelf:

LD 30

SHLF l sloop and shelf numbers

If the system response is other than OK, see the Software Input/Output: Administration (553-3001-311) to analyze the messages.

3For a line card on a superloop, perform a signaling test on a specific card or unit:

UNTT l s c loop, shelf, and card numbers

For the NT8D02 Digital Line card, enter:

UNTT l s c u loop, shelf, card, and unit numbers

If the system response is other than OK, see the Software Input/Output:

Administration (553-3001-311) to analyze the messages.

4End the session in LD 30:

****

End of Procedure

Circuit Card Description and Installation