Nortel Networks 553-3001-211 manual Connecting Apple Macintosh to the DAC, Upgrading systems

Page 510 of 894 NT7D16 Data Access card

Table 167

Print out example (Part 2 of 2)

	DBASE	UPLOAD
	R-232 or R-422	R-232 or R-422
AUTB	ON	ON
BAUD	9600	4800
DCD	OFF	OFF
PRM	KBD ON	KBD ON
DEM	DCE	DCE
DLNG	FRN	FRN
KBD	ON	ON
WIRE	OFF	OFF
PBDO	OFF	OFF

Note: The Upload parameters are printed only when a single TN is specified.

Connecting Apple Macintosh to the DAC

The Apple Macintosh can be connected with twisted pair wire to a port of a NT7D16 Data Access Card (DAC) to allow access to the switching capability. The Macintosh can then access local or remote terminals, personal computers, hosts, and peripherals.

Figure 99 on page 511 shows the 9-pin subminiature D (DB9) connection to the Macintosh. Figure 100 on page 511 shows the mini-8 DIN connection to the Macintosh.

Upgrading systems

The following explains when and how to upgrade your system to support the DAC. Ports 0, 1, 2, and 3 of the DAC will work in any standard 16-pair IPE slot (connect directly to the MDF).

553-3001-211 Standard 2.00 September 2004