Troubleshooting Checklist

Troubleshooting Checklist

If the device is not working properly, refer to Table 4‐2 for a checklist of problems, possible causes, and recommended actions to resolve the problem.

Table 4-2 Troubleshooting Checklist

Problem

Possible Cause

Recommended Action

 

 

 

All LEDs are OFF.

Loss of power.

Ensure that the SecureStack A2 was

 

 

installed properly according to the

 

 

installation instructions in Chapter 3.

 

 

Ensure that the power cords are

 

 

connected properly to an active power

 

 

source that meets the AC input

 

 

specifications for this switch.

 

 

Ensure that the AC power cord is not

 

 

damaged. Replace the power cord with a

 

 

known good one.

 

 

 

All LEDs are OFF

Possible mismatch in code

Connect to the console port and type

 

between the master and the

“show switch”. If a code mismatch is the

 

device. If the switch does not

cause, the output of the above command

 

have the same code as the

will show “code version mismatch”.

 

stack master the switch will not

Disconnect the switch from the stack and

 

join the stack and all LEDs will

 

load the necessary code to match the

 

remain off.

 

stack master.

 

 

 

 

 

No local

Incorrect terminal setup.

Refer to the SecureStack A2

management

 

Configuration Guide for proper setup

startup screen.

 

procedures.

 

 

 

 

Improper Console cable

Refer to Appendix A for proper Console

 

pinouts.

port pinouts.

 

 

 

 

Corrupt firmware image, or

If possible, attempt to download the image

 

hardware fault.

to the device again. Refer to the

 

 

SecureStack A2 Configuration Guide for

 

 

details.

 

 

 

Cannot navigate

Improper Community Names

Refer to the SecureStack A2

beyond startup

Table.

Configuration Guide for the Community

screen.

 

Names Table setup.

4-6 Troubleshooting

Page 68
Image 68
Enterasys Networks A2H124-24FX manual Troubleshooting Checklist, Configuration Guide for proper setup

A2H124-24FX specifications

Enterasys Networks A2H124-24FX is a high-performance network switch designed to meet the demands of modern data centers and enterprise environments. This switch exemplifies the blend of reliability, scalability, and advanced features that enterprises require to ensure seamless connectivity and data management.

One of the main features of the A2H124-24FX is its 24 Fast Ethernet (10/100) ports. These ports provide a robust foundation for connecting various devices within a network, making it ideal for workplaces that require extensive connectivity options. Additionally, the switch supports up to 4 Gigabit SFP (Small Form-factor Pluggable) uplink ports, which facilitate high-speed connections to backbone switches or routers, catering to bandwidth-intensive applications.

Another significant characteristic of the A2H124-24FX is its support for Power over Ethernet (PoE). This technology enables the switch to deliver power to connected devices such as IP phones, wireless access points, and security cameras through the same Ethernet cable that transmits data. This feature not only reduces the need for additional power supplies but also streamlines installation processes, reducing overall operational costs.

Security is a paramount concern for any enterprise network, and the A2H124-24FX addresses this through various advanced security features. It includes support for IEEE 802.1X Network Access Control, which ensures that only authenticated users can access the network. Additionally, it provides features such as MAC address filtering and VLAN support to segment network traffic and enhance overall security.

In terms of management, the Enterasys Networks A2H124-24FX is equipped with a user-friendly interface that allows network administrators to configure and monitor the switch effortlessly. It supports both CLI (Command Line Interface) and web-based management, providing flexibility depending on user preference.

This switch also supports advanced Layer 2 and Layer 3 capabilities, including Quality of Service (QoS) features that help prioritize traffic, ensuring that critical applications receive the necessary bandwidth for optimal performance.

In conclusion, the Enterasys Networks A2H124-24FX combines functionality, security, and ease of management, making it an ideal choice for businesses looking to enhance their network infrastructure. Its robust features and reliable performance can effectively support the complex demands of modern networking environments.