3
Hardware Installation
Electrical Hazard: Only qualified personnel should perform installation procedures.
Riesgo Electrico: Solamente personal calificado debe realizar procedimientos de instalacion.
Elektrischer Gefahrenhinweis: Installationen sollten nur durch ausgebildetes und qualifiziertes Personal vorgenommen werden.
Important Notice
Read the Release Notes shipped with the switch to check for any exceptions to the supported features and operation documented in this guide.
This chapter provides instructions to install the A2H124‐24FX. Follow the order of the sections listed below to correctly install the switch.
For information about... | Refer to page... |
|
|
Considerations Prior to Installation | |
|
|
Required Tools | |
|
|
Unpacking the Switch | |
|
|
Installing Optional | |
|
|
Installing the Switch on a Flat Surface | |
|
|
Rack Mounting the Switch | |
|
|
Connecting Stacking Cables | |
|
|
Configuring Switches in a Stack | |
|
|
Connecting AC and | |
|
|
Connecting to Console Port for Local Management | |
|
|
Connecting to the Network | |
|
|
Completing the Installation | |
|
|
SecureStack A2 Installation Guide
