Installing the Switch on a Flat Surface

To remove a Mini‐GBIC from a port slot, refer back to Figure 3‐1, Figure 3‐2, and Figure 3‐3, and proceed as follows:

1.Attach your antistatic wrist strap (refer to the instructions in your antistatic wrist strap package) before removing the Mini‐GBIC.

2.Remove the cables connected to the Mini‐GBIC.

3.Locate the release tab under the front end of the Mini‐GBIC. For the type of Mini‐GBIC shown in:

a.Figure 3‐1, push down on the metal release tab above the connector as far as it will go to release the Mini‐GBIC from the port slot.

b.Figure 3‐2, push in on the release tab as far as it will go to release the Mini‐GBIC from the port slot.

c.Figure 3‐3, pull out on the release tab to release the Mini‐GBIC from the port slot.

4.Grasp the sides of the Mini‐GBIC and pull it straight out of the port slot.

If storing or shipping a Mini‐GBIC, which has a fiber‐optic connector, insert its protective dust cover to protect the ends of the fiber‐optic fibers from dust or contamination.

Installing the Switch on a Flat Surface

When installing the switch on a flat surface, the installation of the rubber feet is recommended to prevent the switch from sliding on a flat surface. Installing the rubber feet is optional if you are installing the switch in a rack. To install the rubber feet, proceed to “Installing the Rubber Feet” instructions below. For instructions to rack mount the switch, proceed to “Rack Mounting the Switch” on page 3‐10.

Installing the Rubber Feet

To install the rubber feet, refer to Figure 3‐4 and proceed as follows:

1.Place the switch on its back on a sturdy flat surface to gain access to the bottom of the chassis.

2.Remove the four rubber feet from their plastic bag in the shipping box.

3.Locate the four marked locations on the bottom four corners of the chassis.

4.Remove the protective strip from the back of one rubber foot and position it on a marked location and press firmly into place. Repeat this procedure to install the remaining three rubber feet in the other three locations.

5.After installing the rubber feet, return the switch to its upright position.

6.Proceed to “Guidelines for Flat Surface Installation” on page 3‐8. For a rackmount installation, proceed to “Rack Mounting the Switch” on page 3‐10.

SecureStack A2 Installation Guide 3-7

Page 35
Image 35
Enterasys Networks A2H124-24FX manual Installing the Switch on a Flat Surface, Installing the Rubber Feet

A2H124-24FX specifications

Enterasys Networks A2H124-24FX is a high-performance network switch designed to meet the demands of modern data centers and enterprise environments. This switch exemplifies the blend of reliability, scalability, and advanced features that enterprises require to ensure seamless connectivity and data management.

One of the main features of the A2H124-24FX is its 24 Fast Ethernet (10/100) ports. These ports provide a robust foundation for connecting various devices within a network, making it ideal for workplaces that require extensive connectivity options. Additionally, the switch supports up to 4 Gigabit SFP (Small Form-factor Pluggable) uplink ports, which facilitate high-speed connections to backbone switches or routers, catering to bandwidth-intensive applications.

Another significant characteristic of the A2H124-24FX is its support for Power over Ethernet (PoE). This technology enables the switch to deliver power to connected devices such as IP phones, wireless access points, and security cameras through the same Ethernet cable that transmits data. This feature not only reduces the need for additional power supplies but also streamlines installation processes, reducing overall operational costs.

Security is a paramount concern for any enterprise network, and the A2H124-24FX addresses this through various advanced security features. It includes support for IEEE 802.1X Network Access Control, which ensures that only authenticated users can access the network. Additionally, it provides features such as MAC address filtering and VLAN support to segment network traffic and enhance overall security.

In terms of management, the Enterasys Networks A2H124-24FX is equipped with a user-friendly interface that allows network administrators to configure and monitor the switch effortlessly. It supports both CLI (Command Line Interface) and web-based management, providing flexibility depending on user preference.

This switch also supports advanced Layer 2 and Layer 3 capabilities, including Quality of Service (QoS) features that help prioritize traffic, ensuring that critical applications receive the necessary bandwidth for optimal performance.

In conclusion, the Enterasys Networks A2H124-24FX combines functionality, security, and ease of management, making it an ideal choice for businesses looking to enhance their network infrastructure. Its robust features and reliable performance can effectively support the complex demands of modern networking environments.